RSM-SY8 Ultra Sonic Pile Integrity CT Imaging Tester
Application
Ø Acoustic pile tomography detection by transmission method
Ø Acoustic pile integrity detection by transmission method
Ø Concrete crack depth detection
Ø Concrete strength detection by ultrasonic-rebound combined method
Ø Longitudinal wave velocity test of rock mass in geological investigation
Ø Detection of loosen zone of tunnel rock mass
Ø Test of dynamic and elasticity parameters of non-metallic materials
Ø Integrity detection of underground diaphragm wall
Applicable standards
Ø Standard Test Method for Integrity Testing of Concrete Deep Foundation by Ultrasonic Crosshole Testing ASTM D6760-08
Ø Technical Code for Detection of Building Foundation Pile JGJ 106-2014
Ø Dynamic Testing Technology Regulations on Highway Engineering Foundation Pile JTG/T F81-01-2004
Ø Nondestructive Detection Code for Railway Engineering Foundation Pile TB 10218-2008
Ø Technical Regulations on Concrete Strength Detection by Ultrasonic-Rebound Combined Method CECS 02:2005
Ø Technical Regulations on Concrete Defect Detection by Ultrasonic Method CECS 21:2000
Ø Regulations on Concrete Strength Detection of Railway Engineering Structure TB 10426-2004
Detection Code for Building Foundation in Guangdong Province DBJ 15-60-2008
Features
1?Super-large high-definition LCD screen display and built-in high-performance dual-core processor;
2?4 pipes and 6 profiles (6 times of flat detection and 12 times of oblique detection) can be collected at most in a single lifting, and the size, range and specific location determination of the whole pile defect can be displayed in real time;
3?The professional pile three-dimensional CT imaging software is provided and it can make the testing results generate various types of three-dimensional dynamic diagrams, accurately locate the defect and provide the significant basis for the coring and other follow-up supplementary verification;
4?The automatic counting and lifting device can be connected conveniently and quickly and the maximum lifting speed can reach 60 m/min;
5?Using the engineering plastic shell, the instrument is beautiful and durable with solid structure and light weight;
6?imported connectors are used and the complete machine is equipped with waterproof design;
7?Removable lithium battery is provided, desktop charger is supported and spare battery can be provided to ensure that the field work will not be interrupted;
8?The minimum resolution of lifting depth is 1cm.
9?Using the embedded system, it can start up and shut down rapidly and resist the viruses.
Core Advantages
l Domestic initiative rapid field CT
Scanning speed: ≥10 cycles/sec;
Left-hand figure (+description together with the interface on the instrument):
Eighteen profiles can be tested in a single lifting intuitively and accurately and the size, range and specific location determination of the whole pile defect can be displayed in real time;
The maximum lifting speed can reach 60m/min; the minimum resolution of lifting depth is 1cm
l Professional pile three-dimensional CT imaging software
It can make the testing results generate various types of three-dimensional dynamic diagrams, accurately locate the defect and provide the significant basis for the coring and other follow-up supplementary verification
l Removable lithium battery
Long standby, support desktop charger; the battery can be easily changed and will work without interruption at the field
Specification
|
Model |
RSM-SY8 |
|
Master control form |
Low power embedded system Basic frequency: 1GHz Memory: 512M |
|
Sampling method |
Channel multiplexing self-transmitting and self-receiving |
|
Display mode |
12.1-inch high-brightness true-color LCD screen |
|
Operation method |
Touch screen |
|
Storage mode |
16G electronic hard disk |
|
Communication method |
Wired communication |
|
Depth counting method |
Automatic counting |
|
Scanning speed |
≥10 cycles/sec |
|
Trigger method |
Signal trigger |
|
Sampling interval |
0.1?200μS |
|
Recording length |
0.5?4k |
|
Transmit voltage |
500V/1000V adjustable |
|
Dynamic range |
≥100dB |
|
Gain accuracy |
0.5dB |
|
Transmit channel |
Four |
|
Number of receiving channels |
Eight |
|
Number of profiles tested in a single lifting |
Eighteen profiles |
|
Transmit pulse width |
1-100μS continuously adjustable |
|
Frequency bandwidth |
1?500kHz |
|
Acoustic amplitude accuracy |
≤3% |
|
Acoustic time accuracy |
≤0.5% |
|
Receiving sensitivity |
≤10μV |
|
Intertrack crosstalk |
≤1/400 |
|
Data export |
USB |
|
Data uploading mode |
Wifi |
|
Operating temperature |
-20?+55? |
|
Power supply mode |
Removable lithium battery≥10h |
|
Dimensions |
340×270×73mm |
|
Weight |
2.0kg (including lithium battery) |
|
Lifting device |
|
|
Connection method of lifting device |
Wired/wireless |
|
Wireless transmission distance |
30m |
|
Wireless working hours |
≥20h |
|
Minimum space between testing points |
1cm |
|
Maximum lifting speed |
60m/min |
|
Counting method |
Double direction counting |
Standard Configuration
|
No. |
Name |
Quantity |
Remarks |
|
1 |
Host |
1 |
|
|
2 |
Double-transmitting and double-receiving cross-hole probe |
4 |
Optionally select four probes from these three types (50m/70m/100m) (including four wire coils) |
|
3 |
One-transmitting and one-receiving cross-hole probe |
4 |
Optionally select four probes from these three types (50m/70m/100m) (including four wire coils) |
|
4 |
Depth counter and connecting cable |
1 |
Including 10m cable |
|
5 |
Flat probe and connecting cable |
2 |
50KHz, including 5m calbe |
|
6 |
pipe orifice pulleys |
4 |
|
|
7 |
Power adapter |
1 |
|
|
8 |
U disk |
1 |
|
|
9 |
Stylus pen |
1 |
|
|
10 |
Instrument and accessories container |
2 |
|
|
11 |
Tripod |
1 |
|
|
12 |
CT tomography software |
1 |
Including softdog |
