RSM-SY7 Ultra Sonic Pile Integrity Tester
Application
Ø Acoustic pile integrity detection by transmission method
Ø Concrete crack depth detection
Ø Concrete strength detection by ultrasonic-rebound combined method
Ø Longitudinal wave velocity test of rock mass in geological investigation
Ø Detection of loosen zone of tunnel rock mass
Ø Test of dynamic and elasticity parameters of non-metallic materials
Ø Integrity detection of underground diaphragm wall
Applicable standards
Ø Standard Test Method for Integrity Testing of Concrete Deep Foundation by Ultrasonic Crosshole Testing ASTM D6760-08
Ø Technical Code for Detection of Building Foundation Pile JGJ 106-2014
Ø Dynamic Testing Technology Regulations on Highway Engineering Foundation Pile JTG/T F81-01-2004
Ø Nondestructive Detection Code for Railway Engineering Foundation Pile TB 10218-2008
Ø Technical Regulations on Concrete Strength Detection by Ultrasonic-Rebound Combined Method CECS 02:2005
Ø Technical Regulations on Concrete Defect Detection by Ultrasonic Method CECS 21:2000
Ø Regulations on Concrete Strength Detection of Railway Engineering Structure TB 10426-2004
Ø Detection Code for Building Foundation in Guangdong Province DBJ 15-60-2008
Principle
The objectives of the Ultra Sonic Pile Integrity Testing (RSM-SY7) are to determine the homogeneity and integrity of concrete between the probes. The data are used to /confirm/i adequate concrete quality or identify zones of poor quality (due to inadequate vibration, segregation due to over vibration and/or improper concrete placement, washouts of cement due to groundwater flow, cracks due to shrinkage, contamination of the concrete, etc). If defects are detected, then further investigations should be made by excavation or coring the concrete as appropriate, or by other
testing methods.
Features
1. International first four-channel self-transmitting and self-receiving pile profile full-combination ultrasonic detection is provided and a number of invention patent authorizations have been obtained;
2. Self-transmitting and self-receiving circuit design is provided and there is no need to replace the location of acoustic pipe corresponding to probe; the fully combined testing of four pipes and six profiles can be completed in a single lifting, the detection speed is improved significantly and the working strength of detection personnel at the field is greatly reduced;
3. The controllable adjustment gain of test waveform of each profile is delayed;
4. The location of the first wave can be searched automatically and the magnification can be adjusted automatically;
5. The 12.1-inch super-large true-color LCD screen is adopted, the test waveforms, wave trains, wave speeds, amplitudes and other information of 6 profiles can be clearly observed in the field at the same time and the whole pile quality in the testing process can be clear at a glance;
6. The shifting distance of testing point is adjustable within 1-50cm without leakage point and need of repeated testing;
7. The automatic counting and lifting device can be connected conveniently and quickly and the maximum lifting speed can reach 60 m/min;
8. Using the high-strength engineering plastic shell, the instrument is beautiful and durable with solid structure;
9. imported connectors are used and the complete machine is equipped with waterproof design.
Core Advantages
l First international patent
International first four-channel self-transmitting and self-receiving pile profile full-combination ultrasonic detection is provided and a number of invention patent authorizations have been obtained
l Completed fully combined testing of four pipes and six profiles in a single lifting
Self-transmitting and self-receiving design is provided, the detection speed is improved significantly, the location of the first wave can be searched automatically and the magnification can be adjusted automatically;
The test waveforms, wave trains, wave speeds, amplitudes and other information of 6 profiles can be clearly observed in the field at the same time and the whole pile quality in the testing process can be clear at a glance;
The shifting distance of testing point is adjustable within 1-50cm.
l Removable lithium battery
Long standby, support desktop charger; the battery can be easily changed and will work without interruption at the field.
Software
RSM-SY ultrasonic pile analysis software by transmission method
1. The testing point waveform curve of main operation interface, wave train diagram of whole pile and profile depth curve are displayed with linkage
2. The wave train diagram, data table and gray-scale diagram are switched and displayed randomly
3. The display proportions of acoustic velocity depth curve, acoustic amplitude depth curve, PSD depth curve of profile can be adjusted randomly
4. The spectrogram of each testing point can be observed separately for ease of basic frequency analysis
5. Acoustic velocity and acoustic amplitude interpretation algorithm is accurate, and the acoustic velocity and acoustic amplitude can be interpreted individually
6. Support oblique detection and fan-shaped detection data analysis and processing
7. The automatic pipe correction function is owned and the data before and after the correction can be displayed at the same time
8. The output results have a variety of selection styles and combinations and can be compatible with multiple reporting formats.
9. The headers of output results can be customized for selection and the customized header template can be saved
10. The wave train diagram and depth curve diagram can be output on the single-page report paper at the same time
11. The picture output, print output, Word file output, Excel file output and other output modes are supported
12. Complete reports can be generated in batch
Specification
|
Model |
RSM-SY7(F) |
|
Master control form |
Low power embedded system Basic frequency: 1GHz Memory: 512M |
|
Sampling method |
Synchronous self-transmitting and self-receiving |
|
Display mode |
12.1-inch high-brightness true-color LCD screen |
|
Operation method |
Touch screen |
|
Storage mode |
16G electronic hard disk |
|
Communication method |
Built-in wired communication |
|
Depth counting method |
Automatic counting |
|
Scanning speed |
≥20 cycles/sec |
|
Trigger method |
Signal trigger |
|
Sampling interval |
0.1?200μS |
|
Recording length |
0.5?4k |
|
Transmit voltage |
500V/1000V adjustable |
|
Dynamic range |
≥100dB |
|
Gain accuracy |
0.5dB |
|
Number of channels |
Four independent and controllable self-transmitting and self-receiving channels |
|
Number of profiles tested in a single lifting |
Six profiles |
|
Transmit pulse width |
1-100μS continuously adjustable |
|
Frequency bandwidth |
1?500kHz |
|
Acoustic amplitude accuracy |
≤3% |
|
Acoustic time accuracy |
≤0.5% |
|
Receiving sensitivity |
≤10μV |
|
Intertrack crosstalk |
≤1/400 |
|
Data export |
USB |
|
Data uploading mode |
Wifi |
|
Operating temperature |
-20?+55? |
|
Power supply mode |
Removable lithium battery≥8h |
|
Dimensions |
340×270×73mm |
|
Weight |
2.0kg (including lithium battery) |
|
Lifting device |
|
|
Connection method of lifting device |
Wired/wireless |
|
Wireless transmission distance |
30m |
|
Wireless working hours |
≥20h |
|
Minimum space between testing points |
1cm |
|
Maximum lifting speed |
60m/min |
|
Counting method |
Double direction counting |
Standard Configuration
|
No. |
Name |
Quantity |
Remarks |
|
1 |
Host |
1 |
|
|
2 |
One-transmitting and one-receiving cross-hole probe |
4 |
Optionally select four probes from these three types (50m/70m/100m) (including four wire coils) |
|
3 |
Depth counter and connecting cable |
1 |
Including 10m cable |
|
4 |
Flat probe and connecting cable |
2 |
50KHz, including 5m calbe |
|
5 |
pipe orifice pulleys |
4 |
|
|
6 |
Power adapter |
1 |
|
|
7 |
U disk |
1 |
|
|
8 |
Stylus pen |
1 |
|
|
9 |
Instrument and accessories container |
2 |
|
|
10 |
Tripod |
1 |
|
