详细说明
Product Name: in-800 Ce Mobile Approved Newborn Baby Neonatal Infant Incubator Model NO.: IN-800 Type: Infant Care Equipments Certification: CE, ISO13485 Trademark: Audo Specification: CE, , ISO Origin: Jiangsu Product Description STANDARD COMPOSITION:Servo Control Mode: air temp;Instant Parameter Displaying: set temp, air temp, heat power rate;Audible & Visual Alarms: power failure, sensor failure, higher/lower temp, air temperature override, fan failure;Power failure reset memory and self-test function;Hood with dual slope: 4 hand-ports.SPECIFICATIonPOWERModel B-800-1E...........................................................................................................110 / 120 Vac, 50Hz / 60HzModel B-800-2E...........................................................................................................220 / 240 Vac, 50Hz / 60HzPower Input................................................................................................................................................ ≤400VAALARMPower AlarmPower Failure.................................................Activates if primary power to the Incubatorfails orthe power wire is accidentallydisconnected from the wall receptacle.Fan AlarmFan Failure........................................................................................................Activates if Fan motor malfunctions.Sensor AlarmAir Sensor Failure........................................................................Air Sensor malfunction, refer unit to service.Deviation AlarmHigh Air Temperature........................................Activated if displayed Air Temperature is 1.5ºCabove set point.Low Air Temperature............................................Activated if displayed Air Temperature is 2.5ºCbelow set point.Over Temperature AlarmOver Air Temperature....................Activated when displayed Air Temperature was approach 38ºCin Air Mode.System AlarmSystem Failure .................................................................Activated if Temperature Control System malfunctions.TEMPERATURE ConTROL RANGE AND CORRELATIVE SPECIFICATIonSAir Temperature............................................................................................................................20ºC~37ºCTemperature Rise Time ..................................................................................................................................................... ≤30minTemperature Variability................................................................................................................................................ ±0.5ºCTemperature Uniformity................................................................................................................................................ ≤1ºCENVIRonMENT REQUIREMENTEnvironment TemperatureOperation Temperature Range.............................................................................................................................+20ºC~+30ºCStore Temperature Range.................................................................................................-40ºC~+55ºCEnvironment HumidityOperation Humidity Range............................................................................................................................................30%~75%Store Humidity Range...................................................................................................................................................10%~100%Atmospheric Pressure Range..................................................................................................... 700hPa~1060hPaOTHER SPECIFICATIonNoise Level Within Hood Environment.............................................. ≤55dB(Environment noise below 45dB)Carbon Dioxide (CO2) Level within the Hood.......................................................Less than 0.5% when a mixture of CO2 in air is delivered at 750ml/min ata point 10cm above the center of the mattress.Air Velocity Over Mattress.................................................................................less than 0.35m/sInfant Bed Max Load............................................................................................................................................10kgTransfusion Shelf Max Load........................................................................................................................................................2kgFACTORY DEFAULT SETTINGSTemperature Control Mode.......................................................................................................................Air Temperature ModeAir Set Temperature..............................................................................................................................................32ºCTemperature Units.......................................................................................................................................................ºCTechnical SpecificationsB-3000B-2000B-1000B-800Mattress to Hood450mm450mm450mm450mmObservation side of hoodTwo inclineTwo inclineTwo inclineTwo inclineOperate port6(2 Iris ports)6(2 Iris ports)6(2 Iris ports)6(2 Iris ports)Tubing grommets4444Front access panel826×310mm826×310mm826×310mm826×310mmMattress Tray Size630×360mm630×360mm630×360mm630×360mmTechnical SpecificationsPower requirement≤400VA≤400VA≤400VA≤400VATemperature control modeAir and skin servocontrolAir and skin servocontrolAir and skin servocontrolAir and skin servocontrolAirTemp Control Range20ºC~ 37ºC20ºC~ 37ºC20ºC~ 37ºC20ºC~ 37ºCTemperature override mode to20ºC~ 39ºC20ºC~ 39ºC20ºC~ 39ºC-SkinTemp Control Range30ºC~ 37ºC30ºC~ 37ºC--Temperature override mode to30ºC~ 38ºC30ºC~ 38ºC--Skin temp sensor accuracy≤0.3ºC≤0.3ºC--Humidity display range5% ~ 99%---Temperature fluctuation≤0.5°≤0.5°≤0.5°≤0.5°Mattress temperature uniformity≤0.8°≤0.8°≤0.8°≤0.8°Temperature rise time≤30min≤30min≤30min≤30minNoise level within hood environment≤55dB≤55dB≤55dB≤55dBAlarmsPower failure alarmYesYesYesYesFan failure alarmYesYesYesYesSensor failure alarmYesYesYesYesHigh air temperature alarm+ 1.5ºC+ 1.5ºC+ 1.5ºC+ 1.5ºCLow air temperature alarm- 2.5ºC- 2.5ºC- 2.5ºC- 2.5ºCHigh skin temperature alarm+ 1.0ºC+ 1.0ºC--Low skin temperature alarm- 1.0ºC- 1.0ºC--Over air temperature alarm≤38.0ºC; ≤40.0ºC≤38.0ºC; ≤40.0ºC≤38.0ºC; ≤40.0ºC≤38.0ºCOver skin temperature alarm≤38.0ºC; ≤39.0ºC≤38.0ºC; ≤39.0ºC≤38.0ºC; ≤39.0ºC-System failure alarmYesYesYes-Alarm silence functionYesYesYes-Operational conditionEnvironment temperature+20ºC ~ +30ºC+20ºC ~ +30ºC+20ºC ~ +30ºC+20ºC ~ +30ºCEnvironment relative humidity5% ~ 99%5% ~ 99%5% ~ 99%5% ~ 99%Environment air velocity of flow∠0.3m/s∠0.3m/s∠0.3m/s∠0.3m/sOthersRS-232 ConnectorYesYesYes-RailYesYesYes-Infant bed tilt adjusting±10°step-less±10°step-less±10°step-less-Mattress tray Max.load10Kg10Kg10Kg10KgTransfusion pole Max.load2Kg2Kg2Kg2KgCabinet Max.load6Kg10Kg10Kg- Packing size(2 cartons)100×58×80cm100×58×80cm100×58×80cm100×58×80cmGross Weight120Kg120Kg120Kg83Kg
