详细说明
Product Name: Z3080 Drill Press Hydraulic Radial Drilling Machine Model NO.: SQ1706 Condition: New Certification: CE Automatic Grade: Manual Hole Diameter: 0~100mm Controlling Mode: Artificial Layout: Vertical Structure: Vertical Drilling Machine Speed Range: 20-1600 Spindle Travel: 320mm~400mm Weight: 1800kg~11000kg Trademark: OEM Origin: China Product Description Description:A radial drilling machine, also known as a cross arm drill. The headstock can be moved to the leftand right on the rocker arm and rotated ±180° around the column with the rocker arm. Therocker arm can also be raised and lowered along the outer column to accommodate workpiecesof different heights. Smaller workpieces can be mounted on the workbench and largerworkpieces can be placed directly on the machine base or on the floor. Radial Drilling Machinesare widely used in single and small batch production to process the holes of larger and heavierworkpieces. Radial Drilling Machines are available in a wide range of screw holes, threadedbottom holes and oil holes for drilling large workpieces.The main structure:The radial drilling machine is mainly composed of a base, an inner column, an outer column, arocker arm, a headstock and a workbench. The inner column is fixed at one end of the base, andan outer column is sleeved on the outer side thereof, and the outer column can be rotated 360degrees around the inner column. One end of the rocker arm is a sleeve, which is placed on theouter column to move up and down. Since the screw rod is integrated with the outer column andthe lifting nut is fixed on the rocker arm, the rocker arm cannot rotate around the outer column,and can only rotate around the inner column together with the outer column. The headstock is acomposite component consisting of the main drive motor, the spindle and spindle drive, the feedand shift mechanism, and the operating mechanism of the machine. The headstock is mountedon the horizontal rail of the rocker arm and can be operated by the handwheel to move along therocker arm on the horizontal rail.Specification:ModelZ3080x25ADrilling diameter (mm)80Spindle end to table distance (mm)550-1600Spindle center to column bus distance (mm)500-2500Spindle travel (mm)400Spindle taper(Mohs)6Spindle speed range (rpm)20-1600Spindle speed series16Spindle feed range (mm/r)0.04-3.2Spindle feed level16Rocker angle ( °)360main motor power (kw)7.5Lifting motor power (kw)1.5Machine weight(kg)11000Dimension(mm)3500*1450*3300