详细说明
Product Name: Wear-Resistant Boron Carbide Stick up B4c Sandblasting Nozzle Model NO.: SBCN32-6.4, SBCN32-7.9, SBCN32-9.5, SBCN32-11.1, Condition: New Certification: ISO, RoHS Application: Hardware Spraying Equipment Type: Sandblasting Machine Accessories Jacket: Aluminium, Nlyon, and Other Materials. Material: Boron Carbide (B4c) Shipment: TNT, FedEx, DHL, EMS, UPS, etc. Trademark: kumthai Transport Package: Each in a Plastic Case, Total in a Carton Box. Specification: 4.8MM, 6.4MM, 7.9MM, 9.5MM, 11.1MM, 12.7MM. Origin: Zhengzhou, China HS Code: 8424909000 Product Description Excellent Wear-Resistant Boron Carbide Stick up B4c Sandblasting NozzleStickUpNozzle(SBCN)Wear-resistantstickupnozzledesignedforusingwithblasthose.Material:BoronCarbide(B4C).Jacket:Aluminum.The hardness of boron carbide is only secondary to diamond and CBN. The density of the boron carbide products produced by us is close to its academic density 2.52g/cm3. Its advantages are :High hardness, high wear-resistance ability, anti-corrosion, lower cost per use, reducing down time. It's the ideal material for sandblasting nozzle and mechanical seal.Boron carbide can be used to manufacture gun nozzles in the arms industry, which is extremely hard and wear-resistant, no reaction with acid-base, high/low temperature resistance, high pressure resistance, crystal system: hexagonal, density: 2.52g/cm3, Mohs hardness: 9.36, microhardness 5400-6300kg/mm2, bending strength ≥400Mpa, melting point: 2450ºC. Because it has the characteristics of wear resistance and high hardness, Boron Carbide Sandblasting Nozzle will gradually replace the known carbide/tungsten steel and silicon carbide, silicon nitride, alumina, zirconia and other materials sandblasting nozzle in the future.ServiceLifeNozzleMaterialServicelife (h,bytime)Steelgrit/shotSilicasandBrownaluminiumoxideAlumina20-4010-301-4TungstenCarbide500-800300-40020-40SiliconCarbide600-1000400-60050-100BoronCarbide2000-25001000-1500500-1000We can design and produce complex shapes according to customers' requirements.Welcome to discuss with us or send us the drawings for the quotations. SpecificationsItemSpecifications(mm)I.D ΦdExitsizeLength LI.D(blasthose)SBCN32-9.59.51212032SBCN32-11.111.11312032SBCN32-12.712.71412032SBCN27-6.46.4912025.4SBCN27-7.97.91012025.4Note:Specialrequirementsonspecifications and other termscanbesatisfiedthroughdiscussion.Introduction to the Wide Applications of Boron Carbide B4CBoron Carbide, molecular formula B4C, is one of the three hardest materials known (the other two are diamond and CBN cubic boron nitride) and commonly used in tank armor, bulletproof clothing, and many industrial products.Boron Carbide can absorb large amounts of neutrons without forming any radioactive isotopes, so it's an ideal neutron absorber for nuclear power plants, and can be used to control the rate of nuclear fission. Boron Carbide is mainly made as a controlled rod in a nuclear reactor field, but sometimes it is made into the powder to increase the surface area. It has many advantages including low density, high strength, high temperature stability and good chemical stability, widely used in wear resistant parts, ceramic reinforcement, especially in light armor, reactor neutron absorbers, etc.In addition, boron carbide is easier to manufacture and less costly than diamonds and cubic boron nitride(CBN), so it can be used more widely. It can replace expensive diamonds in some applications and is commonly used in grinding, lapping, drilling, etc.Control Nuclear FissionBoron carbide can absorb large amounts of neutrons without forming any radioactive isotopes, which makes it an ideal neutron absorber for nuclear power plants, and neutron absorbers are mainly used to control the rate of nuclear fission. Boron Carbide is mainly made as a controlled rod in a nuclear reactor field, but sometimes it is made into the powder to increase the surface area. At Chernobyl nuclear accident in 1986, Russia eventually stopped the chain reaction in the reactor after dropping nearly 2,000 tons of boron carbide and sand.Grinding MaterialsBoron carbide has been used as a coarse abrasive material long before. Due to its high melting point, it is not easy to cast into artifacts, but it can be processed into simple shapes by melting the powder at high temperatures. So it is often used for grinding, lapping, drilling and polishing hard materials such as hard alloy, gem and so on.CoatingBoron carbide can also be used as a ceramic coating for warships and helicopters, which is lightweight and has the ability to resist armor-piercing bullets penetrating the thermal coating to form a monolithic shield.NozzleIt can be used to manufacture gun nozzles in the arms industry. Boron carbide, extremely hard and wear-resistant, no reaction with acid-base, high/low temperature resistance, high pressure resistance, crystal system: hexagonal, density: 2.52g/cm3, Mohs hardness: 9.36, microhardness 5400-6300kg/mm2, bending strength ≥400Mpa, melting point: 2450ºC. Because it has the characteristics of wear resistance and high hardness, Boron Carbide Sandblasting Nozzle will gradually replace the known carbide/tungsten steel and silicon carbide, silicon nitride, alumina, zirconia and other materials sandblasting nozzle. Kumthai not only supplies high hardness Boron Carbide Powder, but also offers customized high purity and longer service life Boron Carbide Nozzles, welcome to send the drawings for the prices.Other ApplicationsBoron carbide is also used in the manufacture of metal borides and in the smelting of sodium boron, boron alloys, special welding and so on.
