详细说明
Product Name: Water Treatment online Industry Ec Instrument for Green House & Modern Agriculture (EC/TDS-600) Model NO.: (EC/TDS-600) Type: Conductivity Meter Portable: Non Portable Appliance: Water Treatment Display: LCD Range 1: 0-2000us, 0-1500ppm. 0-20ms, 0-200ms Range 2: 0-9999us/Cm(0-10ms),0-5000ppm Accuracy: 1.5%(Fs) Temp. Comp.: The 25 C Basis, Automatic Temperature Compensation Sensor: K=0.1, K=1.0 or 10.0, K=30.0cm Control Output Signal: Two Groups, on/off High Limit and Low Limit Relay Capacity of Contact Point: 3A/AC 250V (with Resistant Loads) Current Output Signal: 0-5V DC / 4-20mA Signal Output, Isolated and MIG Communication Output: Moudbus RTU RS485(Optional) Working Environment: Ambient Temp. 0~50c, Relative Humidity<=85% Installation Mode: Panel Mounted (Embedded) Cable Length: 5m or as Per Request Trademark: JIRS Transport Package: Carton Specification: 48*96*100mm Origin: China HS Code: 9028901000 Product Description online Conductivity/TDS Controller with SensorEC/TDS-600Description: The intelligent conductivity controller EC-600 are new generation upgraded monitor CM-230, Keyboard range switch over, constant input and high/Low limit relay setup, Automatic digital temperature compensation,High/Low limit relay control (alarm) outputIsolation 4~20mA (or 0-5V DC) output signal,Modbus RTU RS 485 communication output (Optional)ESD and MOV protection functionStrong anti-interface function Widely used for electrodialysis, reverse osmosis, ion exchange water system, hydroponic Fertilizer, cooling water control system and general industrial water online monitoring and controlling.Main Technique Specification:Function ModelEC/TDS-600 online Conductivity/TDS ControllerRange0-2000uS, 0-1500ppm, 0-9999uS/cm(0-10mS),0-5000PPM0-20mS, 0-200mSAccuracy1.5%(FS)Temp. Comp.The 25ºC basis, automatic temperature compensationOperation Temp.0~50ºC, with normal temp. Pt. Black or Stainless-steel sensor60~100ºC, with high temperature Stainless steel sensor sensor(optional)SensorK= 0.1 (0-20uS, 0-10ppm) K=0.1(0-200uS, 0-100ppm), K=1.0 or 10.0 (0-2000uS/ ppm,0-9999uS/ppm, 0-10mS, 0-20mS),K=30.0cm (0-200mS) Display3½ Bit LCD Control output signalTwo groups, ON/OFF High limit and low limit relayCapacity of contact point3A/AC 250V (with resistant loads)Current output signal 0-5V DC / 4-20mA signal output, isolated and migrated Communication outputMoudbus RTU RS485(optional)PowerAC 110/220V±10%, 50/60Hz, DC 24vWorking environmentAmbient Temp. 0~50ºC, Relative Humidity ≤85%Overall dimensions48×96×100mm (H X W X D)Hole dimensions45×92mm (H X W)Installation ModePanel Mounted(Embedded)Cable length: 5m or as per requestEC/TDS-600 Picture:Matched Conductivity Sensor, 1/2" NPT, 1/4"NPT threaded: No.1- Pt. Black Plastic Sensor No.2 Tiny Pt. Black Plastic Sensor No.3 -S.S.316L Sensor No. 4-S.S.316L High temp. Sensor No.5- Flanged Sensor
