WD-1201M-DIN-M12(T4/V3/D) DIN Rail PLC Ethernet Bridge for Industrial Communication

Product Name: WD-1201M-DIN-M12(T4/V3/D) DIN Rail PLC Ethernet Bridge for Industrial Communication Model NO.: WD-1201M-DIN-M12(T4/V3/D) Condition: New Certification: CE, ISO, RoHS, FCC Classb Weee Information content: Data Support Network: Ethernet Type: Industrial 4.0 Usage: Telephone, Computer, Workstation, Server, Mobile phone, Laptop, Industrial Communication Security: 128-AES Modulation: Ofdm Transfer Rate(Phy): 1200Mbps Trademark: Wondertek Transport Package: Inner Box and Paper Carto Specification: 120*90*45mm(L*W*H) Origin: China HS Code: 8517699000 Product Description WD-1201M-DIN-M12(T4/V3/D)BriefintroductionDIN Rail Industrial PLC Ethernet Bridge is a powerline telecommunication product which developed by WonderTek Technology (KunShan) Co.,LTD., it supports HomePlugAV2 protocol. At present, it has been widely used in railway, mineral, industrial communication, airport, subway, coal mine, intelligent storage, industrial automation control, automatic garage and other wired or sliding contact line and many other sites.1.1 Highlight1.1.1 Technical parameters lSupport HomePlug/HomePlugAV2.lIndustrial DIN rail style installation.lActual bandwidth up to 550Mbps.lThe maximum transfer distance up to 800 meters.lSelf-adapt the rate.lOne Domain Master can manage 127pcs End Point1.1.2 ManageabilitylSupport Remote Firmware update(TR069).l802.3D Ethernet Bridge.l802.1Q VLAN.lQuality of Service(QoS) .lIGMO(IPv4)Snooping&MLD(IPv6)Snooping.1.1.3Operating environmentlWorking temperature: -40ºC-85ºC.lOperating humidity: 10%-85% no condense.lStorage humidity:5%-90% no condense.1.1.4 Design standardsIEC 60529 IEC 50022IEC 60068-2-6 MIL-STD-810GHomePlugAV HomePlugAV2Specification:ModelWD-1201M-DIN-M12(T4/V3/D)Interface1*M12 LAN 10/100/1000base-TX 1*power interfaceLED display lightEthernet PLC PowerTransferfrequency2-68MHzProtocol(PHY)IEEE802.3,IEEE802.3x, IEEE802.3u HomePlugAV2Security128-AESTransfer rate(PHY)1200MbpsNumber of each group128ModulationOFDMEffective transfer rateTCP/IP 530MbpsManageabilityRemote Firmwareupdate,support TR-069(optional)802.1D Ethernet Bridge802.1Q VLANQuality of Service(QoS)Operating temperature-40ºC-80ºCWorking voltageT4/V3(90-520V AC) D(18-72V DC)Size120*90*45mm(L×W×H)Weight0.30kgOperating environmentOperating humidity:10%-85% (no condense)Storage humidity: 5%-90%(no condense)CertificationFCC,CE class B,WEEE,RoHS1.2 Features(1) Packet loss:≤0.1%(100M,load 70%).(2) Support 7*24 hours all weather operation.(3) Hardware watch dog function.(4) PING≤2MS.(5) M12 shockproof network interface.1.3 Immunity of ESDThe testing voltage which the device should be beared: ±6kV direct Discharge, ±8kV air discharge;Discharge number in Each sensitive testing point: Plus-n-Minus 10 times each;Every time the discharge interval is 1 s, according to B/T 17626.2-2006.1.4 Immunity of electrical fast transient impulse group (Common mode)The testing voltage which the device should be beared:between the power supply voltage port and ground: ±2.0kV;between signal circuit and ground: ±1.0kV;repetition frequency: 5KHz, test duration: 1 min/ time;testing times: Plus-n-Minus 5 times each.According to GB/T 17626.4-2008.1.5 Anti interference of surge impactThe testing voltage which the device should be beared: ±2kV;The interval of continuous impulses: 1min/time;Test number: Plus-n-Minus 5 times each.According to GB/T 17626.5-2008.(protection: all models protection and varistor series of discharge tube type)1.6Anti- vibrationMeet the demand of MX3 in TB1433(0-200Hz,2g acceleration, maximum amplitude 7mm), interface with no loose, device with no Sealing off and drop in the test.1.7 System TopologyModel: WD-1201M-DIN-M12(T4)Model: WD-1201M-DIN-M12(V3)Model: WD-1201M-DIN-M12(D)