Veze Automatic Sliding Doors Detecting Sensor

Product Name: Veze Automatic Sliding Doors Detecting Sensor Customized: Customized Certification: CE IP Rating: IP54 Material: ABS Production Process: Integration Output Signal Type: Analog Type Detection Type: Photon Detector Function Type: Search and Tracking System Trademark: VEZE Transport Package: Wooden Carton/Case Specification: CE Origin: Ningbo Zhejiang, China HS Code: 90330000 Product Description Safety InstructionRelated part should be operated under low voltage condition. All installation process and maintaince be carried out by the supplier.Name of Related Parts▪JST connection( Red:24V power cable; Yellow: Relay )▪COM / NO▪The indicator will shin for few seconds when starting. When object is detected by sensor, indicator lights up.▪Sensitivity potentiometer▪Fluctuation up and down, rotation left and right.Installation1.Please do the installation in the proper position, installation height within 3.5m. Please arrange hole (Φ3.2mm) on the installation module. And hole (Φ12m) for insetting guide line.2.Please connect the signal cable with the terminal of automatic door.Brown and Yellow cable: AC/DC 12-24VGreen and White cable: Signal output COM/NO3.Take the outer cover off, and fix the screws.4.Finish the cable connection and get on power.5.Please set the detection range and disjunctor accordingly.6.Cover with the lid.Picture of Automatic Sliding Doors Detecting SensorAdjustment ( Get on Power )1.Detection rangeNote: Please stand out of the detection range around 5s to ensure the sensor has enough time to finish the self-adjustment.2.Sensitivity adjustmentDetection rangeMIN: 0.5*0.4MMAX: 4*2MSelect different detection range by adjusting sensitivity knob3.Adjustment of detection( Adjust Direction of front and back / Left and Right flexibly )Adjusting angle of plain aerial to get different detection distance range 30=15×2rangeNOTE:Initial setting is 45 degree by factory.All the parameters above are only for reference, detection height is 2.2M.Detection range will be different because of the making material of door and groud, please adjust the sensitivity by the knob metioned above.When it is adjusted to 60 degree, the detection range is the widest, door will keep on closed and open all the time.Special Note▪Position should be fixed tightly to avoid virbrating.▪Do not place into board or other material.▪Moving object should be avoided.▪Fluorescent should be avoided.▪Do not touch directly, ESD protection is necessary.Failure CauseSymptomCauseMethodDoor&indicator lose failureDid not get powerCheck cable connection&power supplyDoor keep on closed and openSensor detected the movement of autodoor, vibration of movement1.Adjust angle2.Check the position3.Adjust sensitivityDoor do not close Red indicator lose failure1.Switch of autodoor controller lose failure2.Incorrect position3.Incorrect output sensorCheck the switch of autodoor controller &setting of outputDoor keeps on moving when it rainsSensor detected the actins of rainAdopt waterproof accessoriesParametersTechnology: Microwave&microwave disposerTransmitting power:<20dBm EIRPInstallation height: 4M(MAX)Power:<2W(VA)Maximum voltage: 42V AC-60V DCMaximum switch power: 30W(DC)/60VA(AC)Guide line:2.5MProtection class: IP54Color: Black/silveryAnti-interference performance: R&tte 1995/5/EC, EMC 89/366/EECPower Voltage: 12V TO 30V AC+/-10%(50Hz to 60Hz): 12V TO 36V DCSize: 120mm(W)×80mm(H)×50mm(D)Frequency: 24,125GHzLaunch frequency density:<5mW/cm²Installation angle: 0-90 degree(lengthways)-30 to+30(lateral)Min detection speed: 5cm/sDetection range: 8m*4m(installation height 2.2M)Maximum current:1ARetention time: 0.5sWorking temperature: -20ºC to +55ºCSheating material: ABS plastic