详细说明
Product Name: Straight Type Fiber Optic HDPE Microduct Duct Connector Model NO.: Micro Duct Connector 14/10mm Certification: RoHS, CE Sizes: 3mm to 32mm Trademark: SMT Transport Package: PP Bag Specification: CE, ROHOS Origin: China Product Description about MicroDuct AccessoriesMicroduct Couplers and End Stops are of a quick connect design, with pull ring release and a clear barrel for viewing. The clear barrel allows for visual inspection to determine if the duct ends are properly seated in the coupler during installation, or if the cable has passed through the coupler during the installation phase.Microduct Couplers are available two configurations; straight and transition to allow the connection of two microducts with different outer diameters. Microcouplers are rated at 175 psi with a safety factor of 4:1. Sizes and specification are listed below:Working Pressure/Temperatures:TrueSeal™ Fiber Optic Fitting Working Pressure (PSI)Fitting Size.....Polycarbonate5mm.............Vacuum to 1757mm.............Vacuum to 1758mm.............Vacuum to 1758.5 mm.............Vacuum to 17510 mm..............Vacuum to 17512 mm..............Vacuum to 17512.7mm.............Vacuum to 17514mm.............Vacuum to 17516mm.............Vacuum to 17518mm.............Vacuum to 175Temp. Range.....-30°F (-34°C) to +180°F (85°C)Actual working pressures will be lower at elevated temperaturesBurst pressures are four times the fittings room temperature working pressure (four time safety factor)Vacuum rating to 28 inches of Hg at room temperatureMicroduct Split Couplersare used when it is necessary to access cables at mid-span for placing slack coils. Available to fit 12mm and 12.7mm O.D. microducts.Microduct Cutters are available in two styles:Standard Straight Cuttersfor clean cuts prior to couplingRing Cuttersare used when necessary to safely access cable in the ductMicroduct End Capsare threaded into microducts internally for pressurizing microducts prior to installing. Microduct End Caps keep microducts from imploding and add stiffness during the installation process. Available to fit 10mm and 12 and 12.7mm microducts.Microduct Coupler Removal Toolmakes removing microcouplers easy saving wear and tear on hands and fingers.Digital Calipersused for measuring the outer diameters of cables and ducts to insure proper sizing and compatibility with Jetting inserts and couplers. Measurements ASME and Metric.
