详细说明
Product Name: Stainless Steel Ozone Tail Gas Destructor Ozonator Exhaust Gas Processing Model NO.: Exhaust Gas Decomposition Device Type: Electrolytic Type Installation: Portable Frequency: 50-60Hz Gas: Air Cooling Method: Air-Cooling Dielectric Material: Ozone Destroyer Certification: RoHS, CE Material: Stainless Steel Technology: Plug The Device in,Heating The Biggest Exhausted Volume: 200g/H Power Rating: 600W Voltage: 600W Inner Temperature: 100-180 Centigrade Temperature Control: Surface Temperature>28 Centigrade Stop Working Color: Silver Application: Ozone Exhausted Treatment Warranty: 12 Months Trademark: Jiahuan Ozone Transport Package: Wooden Case Specification: 14*9*50cm Origin: Gunagdong China HS Code: 85437099 Product Description Super Exhaust Gas Decomposition Device for Ozone DestructionDescription Ozone destroyer is an innovative product of our company. It has the characteristics of small size, low power consumption, long life and good effect. The main purpose is to eliminate ozone tail gas.In practical use, the ozone tail gas treated by the product fully meets the air pollution index stipulated by China Government.At the same time, the effect of ozone tail gas treatment by this product is not affected by humid gas and moisture, and there is no need for "regeneration" treatment, which can not be achieved by ozone destroyer using catalyst, molecular sieve, activated carbon and other fillers.Characteristics of the Device1.Design for heating type2.Fully automatic operation of equipment, protected by double stainless steel3.Initial investment and operating costs are lower than those of activated carbon catalytic and contact oxidation.4.When the tail gas enters the reaction chamber, the ozone molecules are decomposed by heating the catalyst.5.small size, low power consumption, long life and good effectNecessity of ozone tail gas treatment1.Ozone gases are highly oxidizing, which may cause damage to certain articles, but also pollute the environment and stimulate the human respiratory system.2.When ozone is used to treat all kinds of water, such as drinking water, swimming pool water and sewage, no matter which kind of gas-liquid contact device is used, more than 80% of ozone gas will eventually escape from the water and become ozone tail gas. If this part of ozone is directly discharged into the atmosphere or left indoors, it will cause environmental pollution. In these cases, ozone destroyers are needed to treat the ozone tail gas, so that these residual ozone gases can be decomposed immediately and then discharged into the atmosphere.Applications1.Waste water treatment2.Drinking water treatment3.Swimming pool water treatment4.Chemical waste gas treatment5.Aquaculture water treatment etc6.Ozone Residual in Articles Disinfection Cabinet/Disinfection RoomInstallation1.Fix the product on the wall between the equipment with a shelf or place it in a specific (dry, stable, well-heat-dissipated) position.2.Connect the inlet and outlet of the product with the silicone tube3.The silicone tube of the ozone inlet is connected to the outlet of the ozone tail gas (the outlet of the reactor tail gas and the outlet of the ozone tail gas pipeline).4.Place the end of the silica gel hose connected to the outlet of the ozone tail gas processor (the treated tail gas) in the discharge position, which is not easily accessible.5.Power Wire for Connecting Equipment.6.Adjust working time and temperature according to requirement, turn off power switch after completion.More detailsNotices1.Do not use this product near high-precision electronic equipment. Radio interference may cause wrong operation and other problems of high-precision electronic equipment.2.Do not disassemble or refit this product, otherwise it will cause damage, leakage and circuit failure.3.Avoid excessive moisture, water or other liquids entering the product may cause leakage and malfunction of the product.4.Avoid using volatile solutions or organic solvents to wipe equipment, which may damage the surface of equipment.5.Qualified special grounding wires, safe and reliable grounding wires, and the capacity of the lines used are in line with the requirements to ensure the elimination of fire hazards.6.When using ozone, it is strictly forbidden for staff to work in the high concentration ozone space environment, and staff should take protective measures when working in the space environment exceeding the relevant standard ozone concentration.7.Keep in mind that equipment maintenance or maintenance must be carried out under the condition of power failure and exhaustion of air pressure to ensure the safety of personnel maintenance.Why Choose UsGuangzhou jiahuan appliance technology co., ltd Guangzhou jiahuan appliance technology co., ltd established in 2007, with over 150 employees , covering more than 10000m2 , professional making ozone generator and PSA oxygen generator for water treatment and air purification . Our products' ozone generator and oxygen generator have a widelu used in pharmaceutial chemical, food processing,municipal water supply and drainage, industrail waste water treatment,dringking water industry, swimming pool industry,flue gas treatment, air purification and other environmental protection fileds, and make a outstanding achievements in the same industry. Jiahuan always striving to provide the best service . We push ourselves to stay on the top of the industry and to go above and beyond your expectations. Contact to benefit from our expertise.website : http://en.madeozone.com/http://madeozone.en.alibaba.comAddress : NO.2 Hualong road Donghua Industrial area Renhe town Baiyun area Guangzhou ChinaContactHolly ChenTEL:+86 15626054349Website: http://en.madeozone.com/Guangzhou Jiahuan Appliance Technology CO.,LTDNO.2 Hulong Road ,Renhe Town ,Baiyun District, Guangzhou, China
