详细说明
Product Name: Silicone Rubber Cold Shrink Tubing for 4.3 Coax or DC Power Rru Connections, Cold Shrink Silicone Rubber Tubing Model NO.: CST12MD Application: RF Coaxial Connectors Weatherproofing Color: Black or Gray Connector Type: DIN, N and Mini DIN Cable Type: Coaxial Cable and Power Cable Trademark: HarshSeal Transport Package: Standard Package Specification: CST12 Origin: China HS Code: 8547200000 Product Description Cold Shrink Tubing Coax Connector Sealing Kits CST12 SeriesDescriptionCST12series provide the correct Cold Shrink Tubing or the correct Cold Shrink Tubing and special foam to make the installation of coax connector seals easy. The installation does not require tooling, and the quality of the installation is less installer dependent.ApplicationsThe main application is the sealing of coax connectors used in the wireless communication antenna market. These mainly outside installed connectors require an extra sealing.Technical InformationThe outer Cold Shrink Tubing is made from UV resistant EPDM or Silicone rubber material to provide an excellent seal on the connector. In cases where the different coax cable diameter can not be covered with the tube application range, a special foam is used to increase the smallest cable diameter to fit the shrink performance of the Cold Shrink tube.Selection TablePart#Supported Coax SizesMaterialApplication RangeConnectors TypeCST12D 1/2"Jumper Cable to Antenna Connections, 1/2"Cable to 1/2"Cable ConnectionsSilicone Rubber/ EPDM Rubber 13 - 397/16 DIN, N type & Mini Din 4.3-10 & 4.1-9.5CST12MD1/2"Jumper Cable to Antenna Connections, 1/2"Cable to 1/2"Cable ConnectionSilicone Rubber/ EPDM Rubber 13 - 27Mini Din 4.3-10 & 4.1-9.5CST1278MN½" Jumper Cable to 7/8" Feeder Cable Connection,5/8"Cable to 7/8" Cable ConnectionsEPDM Rubber 13 - 49 7/16 DIN & N TypeCST12158MN1/2"Jumper Cable to 1-1/4"or 1-5/8"Feeder Cable Connections5/8"Jumper Cable to 1-1/4"or 1-5/8"Feeder Cable ConnectionsEPDM Rubber 13 - 67.87/16 DIN & N TypeTypical Properties(Mechanical & Electrical)EPDM RubberPropertiesTypical DataTest Method300% Modulus4.7MpaASTM D 412-75Ultimate Tensile Strength11.8 MPaASTM D 412-75Utimate Elongation750%ASTM D 412-75Tear Strength38.6N/mmASTM D624C-73Dielectric Strength19.1KV/mmASTM D149-75Moisture AbsorptionWeight gain 1.8%7 days, 90°C,HOUV Resistance2,000hrs, UVB-313 fluorescent lamp, exposureASTM G-53Typical Properties(Mechanical & Electrical) Silicone RubberPropertiesTypical DataTest MethodHardness49 Shore AASTM D2240Tensile Strength11.8 MPaASTM D 412-75Elongation at Break641%ASTM D 412-75Tear Strength38.6N/mmASTM D624BDielectric Strength19.1KV/mmASTM D149Specific Gravity1.23/
