详细说明
Product Name: Pyroelectric Infrared Sensor PIR203s PIR Motion Sensor Model NO.: PIR203S Application: Home, Industry, Communication Electronic Products, Special Equipment Certification: CE, RoHS Installation Mode: Wall Mounted Usage: Anti-theft, LED Light Type: Sensor Trademark: HW Transport Package: 6000PCS/Carton Origin: China Product Description DEscriptION: Pyroelectric Infrared SensorPart NO.:PIR203S Pyroelectric passive infrared sensorFEATURES:High sensitivity and superior SNR(signal-to noise ratio);High stability for temperature change;High anti-interference ability (For example: vibration, radio frequency interference).APPLICATIonSSecurityLuminaireFamily and other fieldsAPPLICATIONS RANGEThis specification describes a pyroelectric passive infraredsensor for passive infrared sensor device.TYPE OF SENSORBalanced differential type (Series opposed type.)APPEALANCE AND DIMENSIonSVISUALINSPECTIONThere are not remarkable wounds,spots,rust and etc.APPEALANCE AND DIMENSIONSTO-5 Package: see fig 1.ELECTRICAL CHARACTERISTICS( AT 25ºC )ITEMCONDITIONRATING6.1 Signal OutputBlack Body temperature: 420KChopping Frequency: 1HZ, 0.3~ 3.5HZ △fVd=5V,Rs=47KΩ,the amplifier of Gain72.5dBMeasurement method shown in Fig2.>3000mVp-p6.2 Noise OutputChopping Frequency: 1HZ, 0.3~ 3.5HZ △fVd=5V,Rs=47KΩ,the amplifier of Gain72.5dBMeasurement method shown in Fig2.< 70mVp-p6.3 Balance outputBlack Body temperature: 420KChopping Frequency: 1HZ, 0.3~ 3.5HZ △fVd=5V,Rs=47KΩ,the amplifier of Gain72.5dBMeasurement method shown in Fig2 and Fig3.VA = A Element sensitivity (Vp-p)VB = B Element sensitivity (Vp-p)|VA-VB|/(VA+VB)×100%≤10%6.4 Operating VoltageSingle power supply RS=47KΩ2~15V6.5 Source VoltageVD=5V,RS=47KΩ0.4~1.0V6.6 Circuit ConfigurationSee Fig.36.7 Warm-up TimeAfter it conneted, it with the measurement amplifier for Fig.3 description that turns on the power supply beforehand, the amplification output is time until stabilizing.Max: 25 SecOPTICALCHARACTERISTICSITEMRATING7.1Field of View113 degrees from center of Element on Axis X.90 degrees from center of Element on Axis Y.See Fig 57.2Response wavelength bandFilter substrate:SiliconCut on wavelength:5.5±0.5μm Transmission:7~14μm ≥75%7.3 Transmission Characteristics of filterSee Fig 6ENVIRONMENTALREQUIREMENTSITEMRATING8.1Operating Tmeperature-30~70 ºC8.2Storage Temperatur-40~80 ººC8.3 Relative HumidityThe sensor shall operate without increase in Noise Output when exposed to 90 to 95% RH at 30ºCcontinuously8.4 Hermetic SealNo bubbles visible in the 125±5ºC fluorocarbonbath(FC-40) for 20sec8.5 Reliability TestSpecified in Appendix1( page13~14)ROHSCOMPLIANCEThis product conforms to RoHS regulatin.INSPECTIONProcessinspection100% inspection: Item 6.1 to 6.3 and 6.5 among the electric performances of item 6.OUTGOINGINSPECTIONbased on statistical sampling inspection method every manufacture lot is inspected for the electrical characteristics item 6.1to 6.3 ,6.5 of the Item 6,and item 5.1 and 5.3 of the appearance of item 5.PACKINGThe packaging is solid and there isn't breakagePROCESSATFAILUREIn case of finding of failure incoming or process inspection after receipt of products, Both sides negotiate to deal with the failurePRODUCTIonGROUNDChinaREVISIONAny revision of this specification should be made in writing by discussion.
