详细说明
Product Name: Plate Type Milk Pasteurizer Continuous Flow Pasteurizer Model NO.: milk pasteurizer Customized: Customized Application: Milk, Yogurt, Cheese Automatic Grade: Automatic Certification: CE, UL, ISO9001 Power Source: Electric Process: Thermal Processing Type: Continuously Trademark: Ranking Transport Package: Wooden Case Specification: 1000L/H plate type pasteurizer Origin: China HS Code: 847982 Product Description continuous flow pasteurizerPRODUCT DEscriptIonHTST milk pasteurizeris designed for the thermal treatment(pasteurisation) ofdrinking milk and dairy productsorother food products as well as soft drinks and juices.Flash pasteurisation is the most effective process to destroy pathogenic microorganisms by heating the milk to a moderately high temperature for a brief periodto ensure the quality and safety of raw milk.HTST milk pasteurization with a heatrecuperation (heat regeneration)of 90% (energy is re-used)makes this equipment an environmental friendly system,which means that warm milk is used to heat up cold milk before it enters the pasteurizing part.Our flow pasteurizershas been tested and approved by the Federal Dairy Research in Wolfpassing,product range is built according to European hygiene norms.The heat exchanger plates and frame are made of stainless steel. The milk and the heating circuit are equipped with stainless steel pumps. The milk is gently heated indirectly by the heating system using hot water. The pasteurisation unit includes all the necessary equipment for automatic pasteurisation of milk, as well as an automatic control system and an integrated temperature recorder. The package constitutes a tested filter system and a circulation cleaning system.An integrated after cooling with ice water is optionally available. With a suitable ice maker, the milk can be cooled down to 4 °C.We offer flashpasteurizers with a capacity ranging from of 400up to5000 ltr/hour:Control devices with all necessary switches and regulatorsElectric boiler with hot water circulation pumpTwo product pumps: one delivers the product from (included) receiver tank through the heat recovery section, while the second pump is used as security overpressure pump through the pasteurizer, causing a high security pressure difference between outgoing (=pasteurized) and incoming (=raw) product.Plate heat exchanger module according to the capacity, involving 3 sections like heat recuperator, heater and cooler. Energy recovery is approx. 90%.Tube section for 15-30 sec pasteurization temperature holding time, at min. 72 ºC.Alarm system with optical and acoustical signals for temperature and pressure differencesSecurity switch-over valve, one-seat version, for alarm cases, leading the product without pasteurization back to the receiver tank.Chart recorder, multi-channel, with memory card for data storage.Stored data can be downloaded to PC for further processing, printing and archiving.Technical specifications:Weight: ca. 380 kgDimensions: Width: max. 2000 mm, Depth: 800 mm, Height: 1800 mmElectric supply requirements: 3 x 400 V AC, 50 Hz, 15 kWProduct input/output: DN10.Ice-water connection (if required): DN10,Cooling supply requirements: ice-water, 1500 L/h, pressure 1 bar, or milk cooling tank according to the product volume.Heating media: steam or hot waterCooling media: glycol orice bankFlow pasteurizersare manufactured in two models: Type PAWand type PA:HTST milk pasteurizer, type PAW -water-balance systemPlate pasteurizer with cooling of the heated milk by water in counter flow principle (ice water after cooling required). Heat recovery about 85%.HTST milk pasteurizer, typePA - overpressure systemPlate pasteurizer with cooling of the heated milk by cold milk in counter flow principle (energy saving option). Heat recovery about 95%.
