Plastic Super Intalox Saddle Ring for Random Packing

Product Name: Plastic Super Intalox Saddle Ring for Random Packing Model NO.: ZT-PSISR Source: Particle Effect: Improve The Wear Resistance Usage: Chemical Industry Product Type: Random Packing Structure Feature: Saddle Ring Filler Material: PP Trademark: ZhongTai Transport Package: Woven Bag or Ton Bag with Pallet Specification: 25 38 50 76mm Origin: Jiangxi HS Code: 3926909090 Product Description Product's IntroductionPlastic packing is made of heat resistant and chemical resistant plastic. Plastic filler materials include: polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC) and chlorinated polyvinyl chloride (CPVC), and polyvinylidene fluoride (PVDF), etc. . It has good corrosion resistance, large void ratio, large flux, low resistance, low energy consumption, low operating cost, light weight, convenient loading and unloading, and can be reused. It is especially suitable for medium and low temperature (60-280 °C) stripping, absorption and washing towers in petroleum, chemical, chlor-alkali, natural gas and environmental protection industries.The Intalox Saddle Ring is an improvement on the saddle ring, It is characterized by improving the fan-shaped curved surface into a shell-like curved surface with serrated edges, and increasing the opening to communicate the inner and outer surfaces of the filler, increasing the free passage of the fluid, facilitating the distribution of the liquid and the surface renewal, so the processing capacity is better than the saddle ring, of low pressure so transfer performance has improved.Technical DataProduct NamePlastic Super Intalox SaddleMaterialPP/RPP/PVC/CPVC/PVDF,etcLife Span>3 yearsSizeInch/mmSurface Aream2/m3Void Volume%Packing Numberpieces/ m3Packing DensityKg/m3Dry Packing Factor m-11"25×12.5×1.22609051200923901-1/2"38×19×1.21789625200752012"50×25×1.5168976300761843"76×38×2.613098370064138FeatureLarge porosity, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high efficiency of mass transfer.Advantage1. The special structure makes it have large circulation, low pressure drop, good anti-impaction capability.2. Strong resistance to chemical corrosion, large void ratio, energy saving, low operation cost and easy to be load and unload.ApplicationPlastic random packing maximum use temperature of 280 degrees Celsius, widely used in petroleum, chemicals, chlor-alkali, gas and environmental protection industries packing tower.Physical & Chemical PropertiesPlastic random tower packing are tower packing made of Polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC), polyvinylidene fluoride (PVDF), polytetrafluoroethylene (PTFE), etc. It has high void ratio, low pressure drop, low mass transfer unit height, high flood point, sufficient gas-liquid contact, small specific gravity and high heat and mass transfer efficiency. These plastic random packings can be operated at temperatures ranging from 60 to 280 degrees Celsius.Performance/MaterialPEPPRPPPVCCPVCPVDFDensity(g/cm3) (after injection molding)0.980.961.21.71.81.8Operation Temp.(ºC)90>100>120>60>90>150Chemical Corrosion resistanceGOODGOODGOODGOODGOODGOODCompression Strength(Mpa)>6.0>6.0>6.0>6.0>6.0>6.0