详细说明
Product Name: PTFE Sheet/ Rod / Tube (RS11) Model NO.: RS11 Standard: Standard or as The Customer's Request Material: PTFE Shape (For Gasket): Sheet, Rod,Tape Application: Equipment Seal, Flange Seal, Pump Seal Function: Fixed Sealing, Hole Sealing, Rotary Sealing, Nozzle Ring Sealing, Shaft Sealing, Dust Prevention Sealing Shape: Flat Gasket Trademark: RILSON Transport Package: Wooden Case Origin: Zhegjiang, China HS Code: 8484100000 Product Description PTFE gasket sheet/rodSpecifications:1. Heat resistance property---It is able to wok stably between -180° C to +260° C.2. Excellent non-sticky property---It easier to remove those resin, dopes, oil and other sticky things.3. Good mechanical property with no distortion and low friction coefficient.4. Excellent insulation property.5. Materials like carbon, graphite and glass fiber can be filled.6. Virgin and recycled materials are available.Size:(1) Min. Thickness=0.1mm, Max. Thickness=0.5mm, Max. Width= 1.2m(2) Min. Thickness=0.5mm, Max. Thickness=6mm, Max. Width= 2.5mApplication:1. Besing stuck to the heating up flat to reduce the friction.2. Used in wrapping the cables under high voltage and high temperature.3. Being used in sealing the electronic parts.PTFE die-pressed sheet, PTFE Molded SheetSpecifications:PTFE molded sheet is manufactured by molding method with PTFE granular resin.PTFE possesses the best chemical resistance of all known plastics. It does not age. It has the lowest coefficient of friction of all known solid materials and a wide range of practicable temperature from -180 to 260.1. Stretch strength: >15Mpa2. Break elongation rate: 200%3. Virgin and recycled materials available4. Size can be made based on customers' requirement.5. Carbon, graphite can be filledSize:1. Length× Width: 150× 150mm--2000× 2000mm or as your requirements2. Thickness: 3-100mmApplication:1. Anti-corrosion lined materials2. Sealing lined materials3. Lining bearing pads4. Slide block slippers5. Dielectric parts, etc.100% Virgin PTFE Teflon Moulded TubeSpecifications:1. Melting point: 327° C2. Yield strength: 23MPa3. Density: 2200 kg/m34. Coefficient of friction<0.105. Strong chemical-resistant6. Flat and tidy surface, no defects, crevices and separations7. 100% virgin PTFE resin and recycled materials available8. Carbon, graphite can be filledSize:1. O. D. 25mm-1200mm and wall thickness 5mm-500mm die-pressed / moulded. Min Length: 100mm, Max. Length: 300mm2. Wall thickness: 5mm-500mmApplication:Insulating jacket of lead, pipeline of corrosive liquid medium, insulating parts under kinds of high frequencies.Teflon PTFE rodSpecifications:PTFE Rod is manufactured in two distinct ways, extruded PTFE Rod is the most popular and is relevant to smaller sizes, Moulded PTFE Rod is relevant to the diameters over 100mm in size, smaller sizes are also available in extruded form. Molded Teflon rod has a wide range of practicable temperature from -180° C - +260° C and a wax-like surface to which anything hardly rods. Molded PTFE rod has the lowest coefficient of friction of all known solid materials.1. It has the best electrical properties of all plastics.2. Carbon, graphite can be filledSizes:1. Extruded Rod Min. Diameter= 5mm, Max. Diameter= 150mm, Length= normal 1 m, or according to customer's request2. Moulded Rod Min. Diameter= 5mm, Max. Diameter=300mm, Length: Max. 300mmApplication:PTFE molded rod is use of the products the electrical insulation used under various kinds of frequency, the sesal liner of various kinds of corrosivity medium, antisticking materials, lubriation material.If you are interested in our products, please contact me in Email and I will reply as soon as possible.My target of service is to satisfy your requirements.
