PLC Small Lab Internal Mixer 0.2L/0.5L

Product Name: PLC Small Lab Internal Mixer 0.2L/0.5L Model NO.: BP-8172-B Condition: New Operating type: Continuous Operating Additional Capabilities: Milling Mixing Drum Shape: Double Cone Layout Type: Verticle Application Area: Engineering & Construction Certification: CE, ISO, GOST, SONCAP, UL, CCC, API Application: Liquid with Suspended Solids, Powder, Viscous Fluid, Liquid, Granules Stirring Type: Spiral Working: Shear Mixer Mixer Type: Double Screw Cone Mixer Trademark: BAOPIN Transport Package: Polywood Wooden Case Specification: 859*529*900(W*D*H)mm Origin: China HS Code: 8477800000 Product Description PLC small lab internal mixer 0.2L/0.5LThelab internal mixer isequipped with PLC programmablesystemwith human-machine interface operating system. Temperature, time and torque can displayinstantly. The mixing process will be completed automatically, simple and applicable with energy efficiency.This lab internal mixercan be used for testing of raw materials, thermal and shear stability testing of polymer, etc.Parameters:Mixing chamber volume0.2L/0.5 ( optional ) Rotor speed ratio2 : 3Temperature rangeRT ~ 350 ºCAir source pressure0.5 ~ 0.8 MpaMain motor3 KWPower supply 3∮, 5 linesSpecification:1. Refuel method:Feeding directly2. Rotor speed:0-90 rpm3. Rotor type:Roller / Banbury ( optional )4. Heating method:Electro-thermal tube5.Controller:PLC programmable color touch screen has human-machine interface. All the operating parameter can be set and controlled at will. Mould pressuring process and vulcanization curve can be displayed dynamically.FeaturesThree sides of the mixing chamber are independent with mezzanine heating or connecting water-cooling tubes, meeting the process requirements of any milling and refined plastics.The surfaces of the mixing chamber contacted with the material are adopting high corrosion resistance and high wear-resistant material. With the processing of high frequency, carburization, hardening and tempering, chrome plating and polishing, it becomes hard and durable, hard to wear.Strong pneumatic arc pressure mound is matched with the end of mixing chamber. This chamber is of good sealing property, without glue leakage and the mixing can be close to the real working environment.The speed motor drive of high pulling torque has an oval mixer shaft with two wings convex edges of lead angle. The angles are dislocated with opposite strength rotating and shearing, excellent mixing effect and efficient performance, significantly shortening the plasticate cycle.The human-machine interface operating system of PLC programmable can set andinstantlydisplay all the process parameters. The mixing time, mixing temperature, rotor speed and load torque can also be set at will or displayinstantly, realizing the on-line measurement of mixing performance.