详细说明
Product Name: Large/Medium-Sized High-Voltage Wound Rotor Slip Ring 3-Phase Asynchronous Motor Yrkk5004-6-500kw Model NO.: YRKK5004-6-500KW Transmission Medium: Electric Slip Ring Certification: CE, ISO9001, CCC Voltage: 3kv.3.3kv.6kv.6.6kv.10kv.11kv Protection: IP44 or IP54, IP55 Nsulation Class: F Cooling Method: IC611/IC616 Frequency: 50Hz/60Hz Stator Winding: 100% Red Copper Rotor Winding: 100% Red Copper Species: Yr Wound Rotor Slip Ring Motor Rotor Structure: Winding Type Casing Protection: Protection Type Trademark: ZCL Transport Package: Plywood Case Origin: Shijiazhuang, China HS Code: 8501530090 Product Description The wound rotor motor is a slip ring three-phase asynchronous motor. The power rating, installation dimensions and electrical performance of this type of motor comply with the relevant IEC standards. The basic installation method of the motor is the horizontal bottom angle (IMB3), the working system is the continuous working system (S1), and the wound rotor is made of Class F insulation material.The winding rotor motor has two types of bearings: rolling bearing and sliding bearing, depending on the motor power and speed. The rated frequency of the motor's power supply is 50Hz, the rated voltage is 6000V/10000V, and the basic type of protection is IP54. The motor slip ring housing can be protected to IP22 or IP23. Other voltage, frequency and degree of protection motors are also available upon request.Wound rotor motors can be used to drive a variety of different machinery, such as compressors, pumps, crushers, cutting machine tools, transportation machinery and other mechanical equipment, in mining, machinery industry, petrochemical industry, power plants and other industrial and mining enterprises. Used as the prime mover. The motor used to drive the blower, coal mill, rolling mill and winch should indicate the purpose and technical requirements when ordering, and adopt special design to ensure reliable operation.Center height range: H355 ~ 1000mmPower range: 220kW ~ 10000kWNumber of poles: 2/4/6/8/10/12Rated voltage: 3000V/6000V/6600V/10000V/11000VRated frequency: 50HZ/60HZProtection level: IP54 or IP55Insulation class: FWork system: S1 (continuous)Cooling method: IC611/IC616Installation form: IMB3Motor connection: Y (three outlet terminals in the junction box, the junction box from the extension of the spindle is located on the right side of the base)Altitude: no more than 1000mThis type of motor is suitable for use in environments where the ambient air temperature does not exceed 40 ° C and there is no serious dust, the minimum ambient air temperature is -15 ° C, and there is no corrosive and explosive gas in the air (which can also be made into a damp heat or high-altitude motor).The wound rotor motor is a slip-surrounding three-phase asynchronous motor, which can increase the starting torque at a small starting current. The motor is suitable for applications where the capacity of the feeder line is insufficient to start the squirrel-cage rotor, the starting time is long, the starting is frequent, and the small-range speed regulation is required. This series of motors has the advantages of high efficiency, energy saving, low noise, low vibration, light weight, reliable performance, convenient installation and maintenance.Main process flow of the motorMotor stator: casing processing → punching press → iron core seating → coil making → weaving → dipping paint dryingElectronic rotor: blank shaft processing → iron core press installation → iron core cast aluminum → rotor string shaft → weave → dipping paint drying → dynamic balanceMotor assembly: stator rotor assembly → machine test → motor appearance coloring → packaging storageThe motor products manufactured and sold by our company are used in many industries, such as electric power, mining, steel metallurgy, petrochemical, water conservancy, transportation, building materials and many other industries. The equipment for the motor is pump, machine tool, fan, mill, crusher, rolling mill, compressor and many other industrial equipment.The motor products manufactured by our company have obtained the ISO9001 quality management management system certification, passed the CCC/COC, China energy-saving product certification, and passed the certification certificates of CE/UL/IRIS/CAS and other European and American countries. The company strictly improves the quality and efficient motor products and services for users in strict accordance with the requirements of relevant product standards.
