High Technology Pem Cell (Proton Exchange Membrane Cell) in Low Voltage Ozone Generator

Product Name: High Technology Pem Cell (Proton Exchange Membrane Cell) in Low Voltage Ozone Generator Model NO.: DJ800 Type: Electrolytic Type Installation: All Frequency: 50-60Hz Gas: None Cooling Method: None Dielectric Material: Purified Water Certification: SGS Trademark: guangyuan Transport Package: Carton or Wooden Case Specification: 75mm*75mm*40mm Origin: Jinhua, Zhejiang, China HS Code: 84213990 Product Description With our power supply and PEM cell, you can build your own PEM ozone generator, and lifespan more than 8000 running hours.PEM electrolyte ozone generator is advanced electrochemical ozone generation technology products. Its principle is based on pure water as raw materials, at low voltage and high-density current to electrolyze water molecules for cation exchange and proton exchange and generation of oxygen, ozone and hydrogen. There is no need any of prepared equipments, the concentration of ozone output up to 20% (gas weight ratio). The output gas consist of oxygen and ozone only. There is no secondary pollution. Ozone Production800mg/hrOzone Concentration18~20% wt/wt (250-280mg/L)Power SupplyDC 3-5V/12APower Consumption44 W/GM OzonePure Water Consumption6 ml/GM OzoneAmbient Temperature4~35 ºCAmbient Moisture<90%Size75×40×55mmWeight160gTHE INSTALLMENT AND USE OF PEM CELLThe PEM cell used in PEM ozone generation system are mainly installed in ozone equipments producing ozone and ozone water.1. Installation requirements of the equipment producing ozoneRelevant accessories:Cathode water tank/Anode water tank/Connecting pipes/Special power source/RelayThe cathode water tank should be made of non-conductive and anticorrosive materials with agood capacity of heat dissipation;Anode water tank needs to be made of non-conductive and antioxidant materials with agood capacity of heat dissipation;Connecting pipes should be made of antioxidant materials with high tenacity and low coefficients of thermal deformation.2. Installation requirements of the equipment producing ozone water relevant accessoriesRelevant accessories:Pure water source/Booster water pump/Multichannel pipes/Connecting pipes/Mixing device/Special power source/RelayRequirements:Pure water source should be supplied by reverse osmosis equipment, pure water, or distilled water tanks;Booster water pump should be self-suction pump whose effluent water pressure is not lower than 4kg;Multichannel pipes should be stainless steel or service pipes in UPVC standard;The inner diameter of connecting pipes is from 6to 9mm. It should be made of antioxidant materials with high tenacity and low coefficients of thermal deformation;Mixing device should use the methods which are mixed with bridge type multistage turbulent flow and filled porous series flow. Bridges and fillers should be made of ceramic or stainless steel.Jinhua Guangyuan Environmental Technology Co., Ltd. Has its own factory. The factory is aprofessional producer of electrolyte ozone generators, and the first one authorized by MOH to produce electrolyte ozone equipment applying for disinfection of production spaces for pharmaceutical, foodstuff and cosmetic. Introduced from German technology, we worked with Wuhan University and successfully developed more than 20 ozone generators in 2categories and 3series. Our products widely used in industries of pharmaceutical, food, sanitation, water treatment, modern agriculture etc.