详细说明
Product Name: High Quality Disposable Medical Isolation Clothing Model NO.: Two types: the one-piece and the two-piece Logo Printing: Without Logo Printing Group: Adult Quality Guarantee Period: Two Years Ethylene Oxide Sterilization: Ethylene Oxide Sterilization Material: Non-woven Fabric Type: Surgical Supplies Materials Transport Package: Box Specification: Two types: the one-piece and the two-piece Product Description Isolation clothing qualification and product picture PDF[compilation date] February 10, 2020.Instructions for the use of isolation clothing[please read the manual carefully and follow the instructions or use it under the guidance of adoctor][product name] isolator[model specification] conjoined (160, 165, 170, 175, 180, 185); split (160, 165, 170, 175, 180, 185). [product description] the isolator is made of nonwovens as the main raw material by cutting and sewing. Non-aseptic provision, -. Sexual use.[expected use] used for general isolation in outpatient departments, wards, laboratory, etc., in medical institutions.[scope of application] used in medical institutions for examination and treatment to play aprotective role, blocking body fluids, blood, secretions and other spatter or splashing. It can also be used to protect patients with infectious diseases from close contact with droplets.[usage] before using this product, we should first pay attention to packaging and select the appropriate model specifications, open the isolation clothes, zipper to the appropriate position, hold the cuff with the left and right hands, grasp the waist zipper opening of the isolation clothes (serial type), wear the lower limbs first, then wear the upper limbs, zip the zipper to the chest, buckle the protective cap to the head, wear the protective cap to the head, and avoid touching the outer surface of the isolating clothes as far as possible when you take off the isolation clothes. After removal, the inner surface should be outward, and the outer surface and pollutants should be wrapped in it to avoid pollutants coming into contact with the human body and the environment.There is no contraindication.[noes, warnings and instructions]1. Check for damage before wearing it. If damaged, do not use it.two. When you take off the isolation clothes, avoid touching the outer surface of the isolation clothes as far as possible. After taking off the isolation clothes, you should have the inner surface facing outward, and the outer surface and pollution.The dye is wrapped in it to avoid pollutants coming into contact with the human body and the environment.3. The isolation clothes taken off shall be disposed of in accordance with the principle of medical waste disposal.4. Non-sterile products.[storage conditions] Storage in aventilated and dry place.[production batch number] see packing[date of production] see packing[term of validity] five years[record certificate number] Xiang Chang Mubei No. 20200058[technical requirements for products] Xiangchang Machinery No. 20200058[production Enterprise record No.] Xiangchang Food and Drug Supervision and equipment production Readiness No. 20150014Changsha Hairun Biotechnology Co., Ltd.[after-sales service unit] Changsha Hairun Biotechnology Co., Ltd.[registered address] 5/ 8floor, A4 Building, Hunan Lugu International Medical device Industry Park, 229 Gu Yuan Road, Changsha High-tech Development Zone[production address] No. 229 Gu Yuan Road, High-tech Development Zone, Changsha, 5th, 7th and 8th floors of A4 International Medical device Industry Park, Lugu International Medical device Industrial Park, Hunan Province, 2floors of A3 Building [Postcode] 410000[Web site] http://www cshsw6s. Com.[mailbox] cshairun@163 com[version number] 01The contents have been copied to the clipboardIsolation clothing qualification and product picture PDFChangsha Hairun Biotechnology Co., Ltd.Hairun Group.Isolation clothing inspection reportNumber: HR-RD/ZL-024-02Product NameIsolation clothingRequest for examination departmentProduction departmentSpecification /modelConjoined [175cm]Supply departmentI production DepartmentBatch number20200220Sampling date20 February 2020Sampling quantity5 setsReporting date20 February 2020Purpose of inspectionFactory inspectionInspection basis HR- 2B-534-01Inspection itemsTest resultsProject conclusionIsolation clothing should be dry, clean, no mildew spot, the surface of this product dry, clean, no mildew spot, do not allow adhesion, cracks, holes and other defects. There are no adhesion, cracks, holes and other defects in the surface, such as needle seam, bonding or thermal bonding. The joint part adopts the needle processing mode, the needle eye of the needle seam should be sealed, the seam processing mode, the needle eye of the needle seam.1. AppearanceThe needle distance should be 8times 14 needles per 3cm, the thread seam should be uniform and sealed, and the needle distance should be 8times 14 needles per 3cm.Comply with the regulationsStraight, no jump needle. Glue or heat to add 12 needles, the thread seam is uniform and straight, the position after industrial treatment, should be flat, sealed, no jump needle. An isolated bubble with azipper. The zipper of the isolated coat fitted with the zipper can not contain the zipper of the coat without exposure, the zipper can reveal itself, and the zipper can lock itself.This product has the advantages of reasonable structure and convenient strip.The structure of the isolation coat should be reasonable, the clothes should be taken off conveniently, the joint position should be tight, the cuffs and feet should be closed.2. StructureThe position is strict, the cuff, the foot naked mouth adopts the elastic receptacle, the naked mouth adopts the elastic receptacle, the hat |Comply with the regulationsThe mouth, hat, face and waist are closed with elastic face and elasticity at the waist.To close or buckle.The mouth, rope, or buckle of the mouth.3. DimensionsIf the deviation of specification and size shall not exceed the standard size175.0cmComply with the regulations2cm4. Breaking strengthIt should be no less than 45N.55NCmply with the regulations5. Extension at breakComply with the regulationsShould not be less than 15%75%6. Liquid barrier function 6.1 impermeableShould not be less than 1. 67kpa (17cm H, 0)In accordance with the regulations,Cmply with the regulations6. 2moisture permeabilityIt should not be less than 2500g/ (m2). d)Comply with the regulationsComply with the regulations_ aBiotechnology is limitedConclusionThe product is inspected according to HR 2B-534 ≤01, and the results are in accordance with the regulations.Examiner: yesReview entry to old seal /auditor:
