Glass Substrate Annealing Furnace (HSA10005-1907N)

Product Name: Glass Substrate Annealing Furnace (HSA10005-1907N) Model NO.: HSA10005-1907N Fuel: Electric Heating Usage: Industrial Place Style: Horizontal Manufacturing Level: a Media: N2 Burning Style: Ceramic Bar Winded with Heating Wire Trademark: Hengli Transport Package: Standard Exported Package Specification: CE, SGS, ISO9000, CSA Origin: Hefei, Anhui, China HS Code: 8514300090 Product Description Specifictation of this Annealing Furnace:1. Operating Temperature: 600deg. C; Max Temperature: 650deg. C2. Effective Dimentsion of Furnace Entrance: 1000× 50mm(W× H)3. Belt Width: 1000mm4. Belt Material: SUS314.5. Drive System: Big wrapped angle friction drive.6. Speed Range: 50mm~350mm/min.7. Firing Atomsphere: Nitrogen.8. Gas Pipelines: 14 N2 pipelines (the entrance and exit gas curtain have one pipeline separetely; Four in the exhaust stack, seven pipelines are in the chamber; One in the cooling jacket; The gas flow can be adjusted by the flowmeter).9. Oxygen Content Testing: 4 points (the entrance and exit gas chamber have one testing point separately; One testing point in the zone 12 of the chamber and one in the cooling jacket.10. Exhaust System: 4 exhaust stacks(each exhaust stack has a venturi exhaust)11. Cooling Mode: Water cooling.12. Cleaning Mode: Brush cleaning.13. Furnace Layout: Overall Length: 14450mm14. Entrance Vestibule Section: 240mm Length15. Entrance Insulation Zone: 100mm length.16. Heating Section: Length: 8550mm (19 zones) 450mm length/each zone17. Exit Insulation Section: Length: 100mm Length18. Air Cooling Section: 200mm Length19. Water Cooling+ Exit Vestibule Zone: 2000mm Length.20. Load Table: Length: 1520mm21. Unload Table: Length: 1520mm22. Stability of Temp Control: ± 1deg. C, Shimanden SR94 Intelligent Temperature Controller with PID parameter auto-setting. (If the furnace is equipped with industrial computer, the intelligent temperature controller will use MR13 model. )23. Control System: Use DCS control system, single loop intelligent temperature controller, PID parameter auto-setting, Industrial computer carry out multiple program saving.24. Uniformity of the Furnace Temperature: ± 3deg. C(Flat- temperature 600deg. C)25. Control Zone: 19 zones.26. Control Temp Point: 38 points.27. Temperature Testing Point: 1 point (For exit cooling water temperature)28. Chamber Structure: Use 316L 8mm thick Muffle in the chamber.29. Alarm Protection: Over temp, thermocouple failure, low gas pressure, over water temperature and other audible and visual alarm protection.30. Gas Inlet Pressure: 0.2~0.4Mpa31. Flowmeter: 14× 24~240L/min. Its flow is adjustable.32. The Temperatue of Incoming Water: < 20 deg. C33. Water Inlet Pressure: 0.15~0.3Mpa34. The Temperature of Furnace Surface: 35. Max Heating up Power: 152KW.36. Insulation Power of Empty Furnace: 50KW37. Power: 277VAC± 10%, 60Hz± 5%, 3phase, 5line (A, B, C, Ground, 0), independent power supply, total capacity: > 180kVA.38. Weight: about: about 3500Kg39. Overall Dimension: 14450× 1640× 1350(L× W× H) mm40. Installation Dimension: 18000mm× 3000mm× 3000mm(L× W× H), Installation Area: >60m2