Geeko Gk103-1ae-DC5V 4 Pin Power Relay 10A 250VAC Hf32f Pin to Pin

Product Name: Geeko Gk103-1ae-DC5V, 4 Pin Power Relay, 10A 250VAC, Hf32f, Pin to Pin Model NO.: Gk103-1aE-DC5V, Type: Electric Parameter Relay Size: Miniature Action Principle: Electromagnetic Type Protective Characteristics: Sealed Relay Load: Medium Power Relay Number of Pole: 1 Electricity Type: Ac Phase: 1 Usage: Household Appliances Relay Theory: Electromagnetic Relay Contact Rating: 10A 250VAC Unit Weight: Approx.6g Outline Dimensions: 18.4*10.2*15.3mm Coil Power: 0.45W Termination: PCB Trademark: Geeko Transport Package: Carton Specification: 1AE-DC5V Origin: China HS Code: 8536410000 Product Description 10A switching capabilityPlastic sealed and flux proofed types availableOutline dimensions: 18.4*10.2*15.3mmHighly efficient magnetic circuit for high sensitivity:450mWRoHS compliantCOIL DATA (at 23ºC)Nominal VoltageVDCOperateVoltageVDC Max.ReleaseVoltageVDC Min.Max. Voltage VDCCoilResistance(Ω)Coil Power32.250.153.9020×(1±10%)Approx. 450mW53.750.256.5055×(1±10%)64.500.307.8080×(1±10%)96.750.4511.7180×(1±10%)129.000.6015.6320×(1±10%)1511.250.7519.5500×(1±10%)1813.500.9023.4720×(1±10%)2418.001.2031.21280×(1±10%)CHARACTERISTICS Contact arrangement1AContact resistance1)100mΩ Max.(at 1A 6VDC)Contact materialAg-alloyContact rating (Resistive load)5A/10A 250VACMax. switching voltage277VAC/30VDCMax. switching currentStandard Type: 5AHigh-CapacityType: 10AMax. switching powerStandard Type: 1250VAHigh-CapacityType: 2500VAInsulation resistance1000MΩ(at 500VDC)DielectricstrengthBetweencoil & contacts2500VAC 1minBetween open contacts1000VAC 1minOperate time≤10msRelease time≤5msShock resistanceFunctional98m/s2Destructive980m/s2Vibration resistance10Hz~55Hz 1.5mm DAMechanical endurance1×107opsElectrical endurance2)1A type: 1×105ops(5A 250VAC, Resistive load, Room temp., 1s on 9s off)Ambient temperature-40ºC~85ºCHumidity5%to85%RHTerminationPCBUnit weightApprox.gConstructionPlastic sealed, Flux proofedNote: 1)The data shown above are initial values. 2)For plastic type, the venting-hole should be opened in electrical endurance test.