详细说明
Product Name: Full Automatic Formation Tank Principle: Single-Shock Charger Charging Type: Electric Charger Type: Lead-Acid Battery Charger Input Voltage: Less Than 350V Charging Current: 10-300A Rated Power: 2-12V Trademark: Better Transport Package: Export Standard Origin: China HS Code: 8548900090 Product Description Automatic Battery Formation Tank (Double tank)I. ApplicationWater formation tank with automatic battery loading and unloading. Firstly fill the water into the water bath automatically, batteries will be delivered to the water tank automatically, then automatically loading into the automatic tank. After formation, the batteries will be delivered to outside tank conveyor (the water still inside the tank) II. Main parts listFormation tankDescriptionSpecificationMaterialQtyUnitWater bath Length 10000×Width 650mmPVC14mm2pcsStainless steel frameLength 10000×Width 1610mm3041setOutside tank conveyor 600mm widthPP2setDrive system2.2KW including speed reduce motor3042setSealed door4pcCycling water pipe DN40PVC Thermal insulation pipe2setControl systemPLC control, including thermal insulation PP2setFrequency converterMitsubishi2setTemperature probeTwo detect the temperature of circulating water and two detect the temperature of electrolyte.8pcWater inlet electric valveDN402pcTank insulationAccessory 2setsAbove list is for one set of double tank, the proposal need 15 sets of above list.Automatic loading and unloading cart DescriptionSpecificationMaterialQtyUnitAutomatic loading cart Accessory304ss1setAutomatic unloading cartAccessory304ss1setAutomatic loading control systemAccessory1setAutomatic unloading control systemAccessory1setTrack of loading and unloading cartDouble track3041setCirculation Water Cooling System (Chiller)I. GeneralThis proposal is made for the cycling water cooling system used for the formation tank, primarily used for the cooling inside the tank.As the batteries generate heat during the charging process, the surface temperature of the batteries will increase. But, according to the craft requirement, this temperature needs to e regulated and controlled to achieve the optimum effect. Thus, it is required for us to apply water cooling inside the tank during charging. This cycling water cooling system is composed of cooling equipment, variable frequency water supply device, and the cycling cooling channels.A Cooling tower is used as the cooling device in this system. The air inside the cooling tower gets in contact with the water (direct or indirect) to achieve the heat exchange, thus cool down the water. A circular counter-flow cooling tower is used in this process. Water, acts as a recycling coolant in this case, releases the heat it absorbed from the system back to the atmosphere. This reduced the air temperature inside the tower and enables the cooling water to be re-used again. The water supply uses a variable frequency water supply device to ensure a constant pressureinside the pipeline. II. Technical Performance DescriptionSpecificationMaterialQtyUnitWater cooled low temperature screw chiller300P,output water:-10ºC 1setCooling tower 350T1setCooling water pump18.5KW3setsDouble layer insulated stainless steel ice bucket10T1setHeat exchanger50m2316L1setInsulated water storage tank10m3PP3pcsReturn water storage tank5m3PP1pc Return water pump20m3Acid and alkali resistance2setRecycling water pump20m3Stainless steel2setWater supply pump20m3Stainless steel2setVacuum water tankSteel lined plastic1setElectric control cabinet (including frequency converter)1setCirculating internal insulation pipelinePVC thermal insulation pipe 1setAbove list is for one set of chiller
