FRP Handrail &GRP Handrail& Fiberglass FRP Handrail with High Strength

Product Name: FRP Handrail &GRP Handrail& Fiberglass FRP Handrail with High Strength Model NO.: sqtube 1050 Type: Polyester FRP Fiber Type: GFRP Material: Fiberglass Molding Method: Molding Product Categories: FRP Pipe Usage: Environmental Protection, Industral, Household Hight 1050 50sqt Tube: 38 Round Tube Any Lenghth Trademark: MACHS Transport Package: Wood Specification: RH1010 Origin: Jiangsu Nantong HS Code: 392590000 Product Description GRP/FRP Anti Slip Stair TreadsGRP Anti Slip Stair Treads are generally 38mm thickness complete with ahigh visibility yellow nosing, offering higher safety standards in low lighting areas. Afull range of stainless steel fixings are available for various installations. The GRP Anti Slip Stair Treads are then able to be securely fixed for long term safe operating conditionsIndustries: Chemical plant and metal finishing; Construction engineering, traffic and transportation; Petrochemical engineering, ocean survey, water engineering; Food and beverage plants; Textile printing and dyeing and electronic industry.Functions: Anti-slip floor, stair tread, foot bridge; Operation platform, trench cover; Security and safety fence, handrail; Off-shore oil rig, shipyard,shipping deck, ceiling; Ramp ladder, scaffold, railway; Decorative grid, man-made fountain pool grid; Non-conductive and non- magneticAdvantages: Anti-fire; Anti-corrosion and anti-aging; Anti-slippery; Light but high loaded strength; Long service life and maintenance free; Non-conduction or magnetic; Easy installation and rich colors; various size and colors available.SPEC.1, 50x50x5 mm round handrail tube.2, Column spacing: 0.95 meter3, Height: 1.15 meter.4, Including: Three rails5, Round tube guardrail: Dia. 36x 5; Dia. 50x 5and square tube guardrail: 50x50mm could be also produced.6, Many other different types of FRP handrail fittings could be produced as per requirements or drawings.STRUCTURAL PULTRUSION PROCESSThe pultrusion process is ideally suited for the manufacture of structural shapes. Analogous to the steel rolling process, this process allows structural shapes to be manufactured to length, only restricted by transportation limitations.Continuous glass fibers that enter the process on the left are actually pulled the length of the process by atractor (illustrated) or hand-over-hand pullers shown on the right. During the process, the glass bundle of continuous strands is wrapped with continuous strand mats that will provide the transverse strength. The entire reinforcement bundle is then pulled into aliquid resin bath (polyester or vinyl ester) and "wetted" out. The wetted reinforcement package is wrapped in asurfacing veil, which allows aresin-rich finish on the part, offering afirst barrier to corrosion and asmooth finish. The completed package then goes into aperformer that roughly forms the package into the appropriate shape to enter the heated die for curing. The die is the exact shape of the final part desired. Upon exiting the die, the part is over 90% cured and solid. The length of the part required is pulled through the cutoff saw and the process is complete.STRUCTURAL SHAPESNANTONG MACHS' manufactures all standard shapes used for structural projects. They are manufactured in both vinyl ester (standard color is beige) and polyester (standard color is dark gray). Embedment angles are only manufactured in vinyl ester and standard in dark gray to compliment the color of concrete. Reference AGL's Availability List on the following page for acomplete list of structurals provided.ENGINEERING SPECIFICATIonPULTRUDED MACHS® FIBERGLASS STRUCTURAL SHAPES SECTION 06610FIBERGLASS REINFORCED PLASTICS (FRP) FABRICATIonSPULTRUDED FIBERGLASS STRUCTURAL SHAPES PART 1GENERAL 1.0 GENERAL 1.1 REFERENCES:The publications listed below (latest revision applicable) form apart of this specification to the extent referenced herein. The publications are referred to within the text by the designation only. AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) Test Methods: ASTM D-638-Tensile Properties of Plastics ASTM D-790-Flexural Properties of Unreinforced and Reinforced PlasticsASTM D-2344-Apparent Interlaminar Shear Strength of Parallel Fiber Composites by Short Beam Method ASTM D-696-Coefficient of Linear Thermal Expansion for Plastics ASTM E-84-Surface Burning Characteristics of Building MaterialsANSI STANDARD 611.2 ConTRACTOR SUBMITTALS:A. The ConTRACTOR shall furnish shop drawings of all fabricated structural systems and accessories in accordance with the provisions of this Section.B. The ConTRACTOR shall furnish manufacturer's shop drawings clearly showing material sizes, types, styles, part or catalog numbers, complete details for the fabrication of and erection of components including, but not limited to, location, lengths, type and sizes of fasteners, clip angles, member sizes, and connection details.C. The ConTRACTOR shall submit the manufacturer's published literature including structural design data, structural properties data, corrosion resistance tables, certificates of compliance, test reports as applicable, and design calculations for systems not sized or designed in the contract documents, sealed by aProfessional Engineer.D. The ConTRACTOR may be requested to submit sample pieces of each item specified herein for acceptance by the ENGINEER as to quality and color. Sample pieces shall be manufactured by the method to be used in the WORK.1.3 QUALITY ASSURANCE:A. All items to be provided under this Section shall be furnished only by manufacturers having aminimum of ten (10) years experience in the design and manufacture of similar products and systems. Additionally, if requested, arecord of at least five (5) previous, separate, similar successful installations in the last five (5) years shall be provided.B. Manufacturer shall offer a3 year limited warranty on all FRP products against defects in materials and workmanship.C. Manufacturer shall be certified to the ISO 9001-2000 standard.D. Manufacturer shall provide proof of certification from at least two other quality assurance programs for its facilities or products (UL, DNV, ABS, USCG, AARR).E. Manufacturer shall provide proof, via independent testing less than six months old, that materials proposed as asolution do not contain heavy metals in amounts greater than that allowed by current EPA requirements.1.4 PRODUCT DELIVERY AND STORAGEA. Delivery of Materials: Manufactured materials shall be delivered in original, unbroken pallets, packages, containers, or bundles bearing the label of the manufacturer. Adhesives, resins and their catalysts and hardeners shall be crated or boxed separately and noted as such to facilitate their movement to adry indoor storage facility.B. Storage of Products: All materials shall be carefully handled to prevent them from abrasion, cracking, chipping, twisting, and other types of damage. Store adhesives, resins and their catalysts and hardeners in dry indoor storage facilities between 70 and 85 degrees Fahrenheit (21 to 29 degrees Celsius) until they are required.PART 2- MATERIALS2.1 MANUFACTURER: A. Structural shapes shall be MACHS® as manufactured by Nantong Machs Composite Material Co., Ltd.No.288 Huanhai Road,Nantong ,Jiangsu Province,China Post:226005Tel:+086-+513-85302213 Mob:Mr.Yang 008613862949363 Fax:+086+513-820332132.2 GENERAL: A. All structural shapes are to be manufactured by the pultrusion process with aglass content minimum of 45%, maximum of 55% by weight. The structural shapes shall be composed of fiberglass reinforcement and resin in qualities, quantities, properties, arrangements and dimensions as necessary to meet the design requirements and dimensions as specified in the Contract documents.B. Fiberglass reinforcement shall be acombination of continuous roving, continuous strand mat, and surfacing veil in sufficient quantities as needed by the application and/or physical properties required.D. All finished surfaces of FRP items and fabrications shall be smooth, resinrich, free of voids and without dry spots, cracks, crazes or unreinforced areas. All glass fibers shall be well covered with resin to protect against their exposure due to wear or weathering.E. All pultruded structural shapes shall be further protected from ultraviolet (UV) attack with 1) integral UV inhibitors in the resin and 2) asynthetic surfacing veil to produce aresin rich surface.F. All fire retardant FRP products shall have atested flame spread rating of 25 or less per ASTM E84 Tunnel Test.G. All shapes products shall be certified to Standard 61 {use only if choosing aresin system that can be used to produce shapes to the Standard 61 in sections 2.2 C}2.3 Pultruded structural shapes are to have the minimum longitudinal mechanical properties listed below:PropertyASTM MethodValueUnitsTensile StrengthD-63830,000 (206)psi (MPa)Tensile ModulusD-6382.5 x106 (17.2)psi (GPa)Flexural StrengthD-79030,000 (206)psi (MPa)Flexural ModulusD-7901.8 x106 (12.4)psi (GPa)Flexural Modulus (Full Section)N/A2.8 x106 (19.3)psi (GPa)Short Beam Shear (Transverse)D-23444,500 (31)psi (MPa)Shear Modulus (Transverse)N/A4.5 x105 (3.1)psi (GPa)Coefficient of Thermal ExpansionD-6964.4 x10-6(8.0 x10 -6)in/in/°F(cm/cm/°C)Flame SpreadE-8425 or lessN/APART 3EXECUTION3.0 FABRICATIONA. Measurements: Structural Shapes supplied shall meet the minimum dimensional requirements as shown or specified. The Contractor shall provide and/or verify measurements in field for work fabricated to fit field conditions as required by manufacturer to complete the work. Determine correct size and locations of required holes or coping from field dimensions before structural shape fabrication.B. Sealing: All shop fabricated cuts or drilling shall be coated with vinyl ester resin to provide maximum corrosion resistance. All field fabricated cuts or drilling shall be coated similarly by the contractor in accordance with the manufacturer's instructions.C. Hardware: Type 316 stainless steel bolts shall be provided.3.1 INSPECTIONA. Shop inspection is authorized as required by the Owner and shall be at Owner's expense. The fabricator shall give ample notice to Contractor prior to the beginning of any fabrication work so that inspection may be provided. The structural shapes shall be as free, as commercially possible, from visual defects such as foreign inclusions, delamination, blisters, resin burns, air bubbles and pits.