详细说明
Product Name: Eltek Solar Charger Module Flatpack2 48/1500 He Solar (PART NO. 241115.650) Model NO.: FLATPACK2 48/1500 HE SOLAR Condition: New Certification: CE, ISO, RoHS Information content: Data Support Network: Ethernet Type: Wired Usage: Telephone, Computer, Workstation, Server Weight: 1.950 Kg [4.3lbs] Dimensions: 109X41.5X327mm Trademark: Eltek Transport Package: Plywood Case Specification: Brand New Origin: Wuhan HS Code: 8504409190 Product Description Short Description:With the MPPT* algorithm ensuring close to 100% panel utilization and an efficiency up to 96.5%, the galvanic isolated solar charger sets new standards for renewable power in telecom.The combination of innovative design, efficiency and reliability makes the Flatpack2 HE SOLAR stand out.ApplicationsThe Flatpack2 HE SOLAR charger is suitable for any telecom site with autonomous (solar only) or hybrid solar power. It can be used in parallel with any other Flatpack2 rectifiers feed by generator or unreliable mains on a hybrid side.The Flatpack2 HE SOLAR charger is fully integrated with the standard Flatpack2 family which means it can be used in any 48V FP2 system solutions with "4AC" power shelves and Smartpack controller. Typically each charger is fed by one string of 4 to 6 solar panels. Galvanic isolation between solar panels and batteries/ telecom equipment provides high level of surge protection and reliability.The Flatpack2 HE Solar module is CE marked and UL listed for world wide installations.Product features and advantagesMaximum Peak Power Tracking (MPPT)The charger uses a digitalized advan ced control algorithm that finds the solar panel voltage that generates the maximum power independent of sun availability. The charging is continuous according to performance profile for panels. In addition to finding the profiles peak power a full scan is performed at a fixed interval to stay on peak even with panel failures and major shadings. This gives close to 100% panel utilization.Smartpack2 ControllerAll standard control and monitoring features are available with solar charger plus additional feat ures like warnings for shaded/ dirty solar panels and energy monitoring.Energy LoggingIntegrated energy logging feature will monitor the power supplied from solar panels through the charger.Energy log is stored on a historical basis in controller. The kWh or Wh supplied and consumed on site is stored on hourly, daily and weekly basis. Values can be seen 52 times back in time from the last log.Generator ControlTo minimize fuel consumption on a hybrid site the controller utilizes calculated backup capacity data and optional time delay to give start/ stop signals. Fuel tank level monitoring gives full visibility of consumption, theft and refill interval.Forced charging can be triggered by daily time schedule, monthly periodical run time and emergency charge based on fast battery voltage drops. Charge mode during generator run is selectable between normal temperature compensated float charge and boost charge.Flatpack2 48/ 1500 he solar solar charger moduleVoltageNominal: 170-230 VDC Tolerances: 8S-26S VOCStart-up voltage150VDCMaximum Current9.5 Armsmaximum at nominal input and full load10Armsmaximum at 8SVOC and full loadInput protectiono Varistors for transient protectiono Fuse in both lineso Reverse polarityOUTPUT DATAVoltageOefault: S3.SVDCFloat/Boost: 48 - S7.6 VDCFor input voltages > 230VDC output stand by/test voltage is limitedMaximum Output Powef1S00 W. derating below 170V input800Wat 8&V inputMaximum Current31.3 Amps at 48 VOCCurrent SharingPassive, to optimize the power available from each string of solar panelsStatic voltage regulation*±0.5% from 10% to 100% loadDynamic voltage regulation*±5.0% for 10 -90% or 90 -10% load variation, regulation time < 50msRipple and Noise*< 2S0 mV peak to peak;0 MHz bandwidth< 2 mV rms psophometricOutput detectionOvervoltage shutdown;Hot pkjg*in • Inrush current limiting;Short circuit proofHigh temperature protection; Fuse♦ 6*ted on power sopped not Hmited by sattrpwalsOTHER SPECIFICATIONSEfficiency>96% at 3080% load and 200VDC inputIsolation3.0 KVAC - input and output 1.SKVAC • incut evlh&SKVDC-output earthAlarmsHigh temperature shutdown;Charger Failure;Overvoltaoe shutdown on outputFan failureLow voltage alarm at 43.5V o CAN bus failureWarningsLow input voltage;Low temperature shutdown;Charger in power derate mode ;Remote battery current limit activatedInput voltage out of range, flashing at overvoltage;Loss of CAN communicatton with control unit, stand alone modeVisual indkationsGreen LEO: ON. no faults;Red LED: charoer failureYellow LEO: charger warningOperating temp.40 to *7SK (-40 to bVt). dating linear above ^SSX (+131#F) to 1200W at *7S#C (+167*F)Storage temp.40 to ♦85<C (.40 to +18S,F)Cooling Fan (front to back airflow)Fan SpeedTemperature arxJ current regulatedMTBf> 350.000 hours Telcordia SR-332 issue I. method 1 (a) (fmtmn: 2S*C)Acoustic Nocse20dBA at racranal input and full k)dd <= 25^Q&6dBA at rxKnindl input and full k)dd (fmtmn > 40^)HuntftyOperatir>g5% to 95% RH non-condensingStorage:0% to 99% RH norveondensingDimensions109x4tSx327mm(WxHxD)(4.25x 1.69x 139)Weight1.950 kg (4.3bs)APPLICABLE STANDARDSElectrical safetyIEC 609SCM Ul 60950-1CSA22.2EMCETSIEN300 386 V.1.3.2 EN 61000*6*1 (immunity, light industry)EN 6100&6-2 Ommunity. industry)EN 61000*6-3 (emission, tight irxlustry} EN 61000^-4 (emission indistey)EnvironmentETSJ EN 300019-2*1 Class 1.2ETSI EN 300132*2ETSI EN 300019-2-2 Class 2.3 ETSI EN 300019-2-3 Class 3.2RoHS compliantORDERING INFORMATION24111S.6S0Flatpack2 48/1500 HE SOLAR
