Counter-Flow Cooler for Biomass/Pellet Cooling Machine

Product Name: Counter-Flow Cooler for Biomass/Pellet Cooling Machine Model NO.: NLC1.5 Certification: CE, ISO, SGS Capacity : 1.2-2 T/H Power: 0.25+5.5 Air Volume: 1.5 M3 Trademark: VANGTON Transport Package: Wooden Case Specification: 1.5 m3 Origin: China HS Code: 84796000 Product Description The counter-flow cooler is used for cooling pellet production in avery fast speed. When warm (hot) pellets get into cooling tank the powder and warm air are drawed out at the same time and avoid the sticking problems. If inlet pellets touch the high level limit sensor, the vibrator motor will operate immediately to discharge the products. Cooling air is counter-flow to the pellets to achieve high cooling efficiency. Fine particles are easy to be blown out to avoid inside sticky. Uniform distribution can affect cooling thoroughly from first to last batch.ModelPower kwAir Volume m3/minCapacity t/hNLC1.20.18+41.20.8-1.2NLC1.50.25+5.51.51.2-2.0NLC2.50.25+152.52.0-4.0NLC40.37+224.04.0-6.0NLC60.37+376.05.0-8.0Cooling Process Cooling and screening process The Pellets from pellet mill may exit at up to 88°C and 17-18% moisture. The temperature of pellets must be quickly reduced to make the moisture level to 10-12% or less for proper storage and handling. Pellets must therefore be cooled and dried. Our pellet cooler machine adopt counter-flow cooling principle, pellet cooled fully and equally. The temperature of the pellets after cooling is not higher than room temperature +3-5 degree.Counter-flow cooler principle: The counter-flow cooler principle is adopted to cool the pellets with high temperature and moisture. Hot air touches hot pellets and cool air touches cool pellets so as to avoid the pellet surface crack caused by sudden cooling produced by direct touching between cool air and hot pellets. At the same time, the airlock is used for feeding and space of air inlet bigger, therefore it can get better cooling effects. After the pelletizing process, the temperature of the feed pellet is about 60-80 degree, and the moisture content of the wood pellet is about 15%, so we need use cooler to reduce about 3-4% moisture, such this the wood pellet is easy to store.In the process,we choose FDSP SKLN series Counterflow Cooler.Features of counter-flow cooler1. After cooling pellets temperature don't exceed room temperature 3-5°C.2. The discharge structure of slide gate runs stably and smoothly.3. Aunique slide discharge door structure.4. Suitable for cooling avariety of pellets material.5. Low power consumption, easily operation.Advantages of counter-flow cooler1. It can avoid the quench cracking of the pellet surface. It can also avoid the core moisture and heat are difficult to distribute and the pellets are fragile in the cooling time and other shortcomings, which are generally caused by the vertical cooler.2. The machine has the function of high capacity, good cooling effect, high degree of automation, low noise, easy maintenance. The counter-flow cooler is used for cooling pellet production in avery fast speed. When warm (hot) pellets get into cooling tank the powder and warm air are drawed out at the same time and avoid the sticking problems. If inlet pellets touch the high level limit sensor, the vibrator motor will operate immediately to discharge the products. Cooling air is counter-flow to the pellets to achieve high cooling efficiency. Fine particles are easy to be blown out to avoid inside sticky. Uniform distribution can affect cooling thoroughly from first to last batch.OUR SERVICPre-sale service1.Our professional and experienced engineer team helps every client to find his most suitable equipment or chose of plant.2. Any kind of legal logo printing or design are available.3.Good Quality +Factory Price +Quick Response +Reliable Service, is what we are trying best to offer you.After you choose:1. We will make drawing and show you how the pant looks.2. Every equipment will be checked carefully before packing. Video on machine testing is available.3. Email you the tracking no., and help to chase the container until it arrives you.After-sale service1.We are very glad that customers give us some suggestion for price and products.2.If you have any question,please contact us freely by E-mail or Telephone.FAQQ. what is your payment term?A: T/T 30% down payment, balance to be paid before shipment.Q: what is your main market?A: South America, Eastern Europe, Southeast Asia, Africa, Oceania, Eastern AsiaQ: what is your producing time?A: Producing time depends on that machines you ordered. Usually takes 45 days.Q: what documents you can offer?A: We can offer invoice, packing list, contract, instructions, customs declaration, certificate of origin, CE. If client need other documents, specifications, please confirm with service staff.Q: If equipments have some quality problem, how would you deal with?A: We will responsible for all the quality problems. We will check the machine to get the problem. If need parts, will send them to you.Q: how to install the equipments?A: We send 1-2 engineer (100usd/person/day) to the local plant for helping install and commissioning equipments. To save time, our service stuff will tell you what to prepare in advance. We can also teach the workers to how to use the machines and how to make the products better.Web: www.vangton.com (english) www.vangton.ru (russian)