Coal to The Electric Electromagnetic Heater Bearing Heater 30kw Jx

Product Name: Coal to The Electric Electromagnetic Heater, Bearing Heater 30kw Jx Model NO.: JS1000-030 Brand: Jonson Structure: Wall-Mounted Certification: CE, ISO Type: Induction Heating Machine Power Adjustment Range: 20%~100% Rated Voltage: 380V Voltage Adaptation Range: 340V~440V Rated Power: 30kw Adapt to Environmental Humidity: Less Than or Equal to 95% Heat Dissipation Mode: Air-Cooled / Water-Cooled Adapt to Ambient Temperature: -20 Degrees Celsius to 50 Degrees Celsius Trademark: Jonson Transport Package: Carton Specification: 245mm*450mm*261mm Origin: Guangdong Province, China HS Code: 8514400090 Product Description Coal to the electric electromagnetic heaterModel JS1300-030 (Rubber electromagnetic heater) is a new generation of our company's new generation of standard industrial and commercial electromagnetic heating efficient heating experts. It is applied to loads with small load area, short length, large heating power, and high heat density. It is widely used in commercial induction cookers, mold heating, and heating. Using the company's fifth-generation digital processing platform technology, embedded 32-bit processing system, full digital phase-locked loop PWM control, has high reliability and flexibility. Its user-friendly interface makes your installation, operation, and control as flexible and convenient as playing games. New IGBT technology, powerful communication capabilities, accurate temperature control performance, and high reliability all make control a pleasure.1,Connect the power supply voltage of the cooling fan, but connect the 220V power when the fan is 220V, and connect the 380V power when the fan is 380V2,Connected with cooling fan 220V / 380V (depending on the user, generally 380V)3,When the external cooling fan is DC 24V, this interface is a switch that controls the 24V fan to work or stop. The two ends of the interface are actually the normally closed contact points of the relay output on the motherboard.4,Dual AC 24V power supply (choose 4 or 5 when making half-bridge)5,Dual AC 24V power supply (choose 4 or 5 when making half-bridge)6,Single AC 16V power supply7,Power indicator (red)8,Work indicator light, flashing during standby, and always on (green) during work9,External indicator light, led to the LED interface outside the chassis10,The soft start interface is connected to the R / s interface outside the chassis (can be set to open or close work through F-20, factory default close work, open stop status11,Finely adjust the power potentiometer. When there is a large deviation in power, this potentiometer can be adjusted appropriately.12,32-bit high-speed DSP processor13,Externally connected programmable operating display14,Isolated RS485 communication interface15,External load temperature detection interface 1, with an accuracy of ± 1 ° C (maximum 150 ° C) single-channel, default 1 is used to measure external working temperature16,External load temperature detection interface 2, with an accuracy of ± 1 ° C (maximum 150 ° C)17,Multi-function input interface (set by F-20)(1)10K input for external connection potentiometer can adjust the power range from 20% to 100%(2)Externally connected PID input (0 ~ 5V) inputDo infrared thermometer or thermocouple conversion voltage 0 ~ 5V input to achieve the display temperature and control power size (up to 1000ºC can be measured and displayed)18,Connect the high-frequency Mutual inductor and pay attention to the direction. If the direction is reversed, the power is very small19,IGBT module drive (when doing half-bridge, choose 19, 20 or 23, 24)20,IGBT module drive (when doing half-bridge, choose 19, 20 or 23, 24)21,Connected to high voltage DC bus22,IGBT temperature sensor interface23,IGBT module drive (when doing half-bridge, choose 19, 20 or 23, 24)24,IGBT module drive (when doing half-bridge, choose 19, 20 or 23, 24)25,Connected to high voltage DC bus26,RS485 communication interface, connect A ,B27,Externally connected K-type thermocouple28,Externally connected 12V relay drives other required loads, synchronized with the fan start/stop of the machineNamePerformance parameterrated powerThree-phase 30KWRated input current40-45(A)Rated output current40-70(A)Rated voltage frequencyAC 380V/50HzVoltage adaptation rangeconstant power output at 300 ~ 400VAdapt to ambient temperature-20ºC~50ºCAdapt to environmental humidity≤95%Power adjustment range20% ~ 100% stepless adjustment(That is: adjustment between 0.5 ~ 30KW)Heat conversion efficiency≥95%Effective power≥98%(Can be customized according to user needs)working frequency5~40KHzMain circuit structureFull bridge series resonanceControl SystemThe DSP-based high-speed automatic phase-locking tracking control systemApplication modeOpen application platformmonitorProgrammable digital displaystart time<1SInstantaneous overcurrent protection time≤2USPower overload protection130% instantaneous protectionSoft start modeFully electrically isolated soft start heating/stop modeRS485 communicationModbus RTU standard communication protocolSupport PID adjustment powerIdentify 0-5V input voltageSupport 0 ~ 1000 ºC load temperature detectionAccuracy up to ± 1 ºCAdaptive coil parameters10 square line, length 60m, inductance 250 ~ 300uHCoil to load distance(Thermal insulation thickness)20-25mm for circle, 15-20mm for a plane, 10-15mm for ellipse and within 10 mm for superellipseFAQ Q: Where is your factory?A: Located in Foshan city, China.Q: Are you a trading company or manufacturer?A: We are a factory.Q: How long is your delivery time?A: Generally it is 10 days if the goods are in stock. or it is 40 days if the goods are not in stock, it is according to quantity.Q: What are your terms of payment?A: Payment:30% T/T in advance, Pay in full before shipment.Q: Can I do a customized design? Such as printing logo, change color, material, size, structure, and shape, etc...?A: Yes, both OEM and ODM services are offered. can be done as your request. Pls, contact us for more details.Q: What other products does the company have?A: Electromagnetic heater, electromagnetic steam generator, Electromagnetic hot blast furnaceWhy Choose us?1,The world-famous brand Infineon IGBT inverter module is used to ensure the stability of the product.2, aHigh-speed DSP phase-shifting algorithm is used, and each output cycle is precisely calculated to achieve the optimal energy-saving purpose.3,Magnetically isolated drive technology solves the interference problem caused by the optical drive.4,strong environmental adaptability, can be used in harsh environments;5, The system control power supply adopts multi-level EMI suppression to ensure the best quality power supply under harsh power supply conditions.6, strong anti-interference ability, up to more than 50MW combination of parallel work and reliable operation.7. Coil to ground protection function. When the coil is broken or the coil is shorted to ground, it can effectively protect the whole system and ensure safe use.8. It can be customized by water cooling and air cooling, and the cooling fan is a high-speed dc fan to protect the controller cooling system9. The incoming and outgoing wires of the power supply use copper bar structure and pure copper high-current terminals to ensure that the copper bars and terminals do not generate heat when they are overworked.