Clear Epoxy Resin for BMW Badge (312AB-8)

Product Name: Clear Epoxy Resin for BMW Badge (312AB-8) Model NO.: 312AB-8 Color: Clear Composition: Organic Material Promoter Composition: Curing Agent Characteristic: Resist Yellow, Waterproof, Bright Surface Main Agent Composition: Thermosetting Resin Classification: Room Curing Material: Epoxy Application: Construction, Badge, Nameplate, LED Resin Letter Morphology: Liquid Bonding Function: Structural Adhesive Shelf Life: Six Months The Mixing Ratio: 3:1 Package: 5kgs; 20kgs MOQ: 20kgs Delivery: 3 Days OEM: Available Free Sample: Available Trademark: Jinhua glue Transport Package: 20kg/Set, Carton Specification: SGS, ROHS, MSDS, STC Origin: Shenzhen, Guangdong, China HS Code: 3506912000 Product Description Epoxy resin No.: 312A/B-8Epoxy resin Specification: 20kg/set[Main Component of epoxy resin]A component is resin, B component is curing agent.The main agent 312A-8 Curing agent 312B-8Color: Colorless transparent Colorless transparentSpecific gravity: 1.15 0.96Viscosity 25° C: 2000-4000CPS 100MAX[Feature]Epoxy resin 312 AB-8 is based on the room temperature, having the features of:(1) good flowing property(2) natural defoaming(3) anti-yellowing property(4) high transparency without ripples(5) bright surface, suitable for curing at room temperature or high temperature[Scope Of Application]The products of this series are widely used for LED luminous letters, picture frames, handicrafts, glue, badges, high-grade resin letters and the insulation of other electronic components, moistureproof, potting, confidential encapsulation, etc.[Conditions of usage]1)Mixing ratio: A: B = 100: 33(weight ratio)-->3: 12)Hardening conditions: 25° C × 8H to 10 H or 55° C × 1.5H (2 g)3)Usable time: 25° C × 40min (100g)[Using Method]1. Working environment: The container of holding glue please keep clean, A and B part should be in accordance with the weight ratio, weigh accurately, mix fully along the container wall by clockwise and use after 3 to 5 minutes.2. According to the operational time and dosage of mixing rubber, avoid wasting. When the temperature below 15° C, please put A glue to glue again after warm up to 30° C, easy to operate, (a glue will be thicken when low temperature ); Must be sealed lid after use, avoid product rejection caused by moisture absorption.3. When the relative humidity is more than 85%, the curing surface easy to absorb moisture in the air, form a layer of white mist, so when the relative humidity is more than 85%, is not suitable for room temperature curing, suggest to use the heat curing.[Warning]1. The operating environment should be ventilative and should keep away of the fire. Closely sealed after use.2. Avoid the glue contact the skin and the eye, if contacts the skin, with soap and clear water cleaning, if touches the eye carelessly, uses the clear water to flush and to see a doctor immediately.3. If the liquid cement has the stratification when used for a long time, use after the agitation evenly, do not affect its product quality4. Take strict precautions against touching by the kids and entering into the mouth.5. Please make a trial to avoid usage mistakes before application.[Storage And Packing]Stock the products in the air-tight seal at the temperature of 25° C. The shelf life is half a year. It is available to use based on passing of the test if being beyond the shelf life.Thepropertiesafterhardening1)HardnessshoreD<852)WithstandvoltageKV/mm223)FlexuralstrengthKg/mm2284)VolumeresistivityOhm31x10*155)SurfaceresistanceOhmm25X10*156)ThermalconductivityW/M.K 1.367)Inducedelectricloss 1KHZ0.428)Thermaldeformationtemperature°C809)Moistureabsorption%<0.1510)CompressivestrengthKg/mm2 8.4FREE SAMPLE IS AVAILABLE!!!This model can be widely used for nameplate, badge, craft, souvenir, with water clear apperance, it will have a smooth, shinning surface after cured. Please contact us to talk more about your application and for best solutions!!!