详细说明
Product Name: China Optipow 135 24V Piston Pulse Solenoid Alstom Model NO.: OPTIPOW105 OPTIPOW135 Trademark: SMCC OR NO MARK Transport Package: According to Customer Requirements Specification: 910mm*340mm*29mm Origin: China HS Code: 8481100090 Product Description Piston type (plunger) pulse valve,The French Alston (ALSTOM) valve Optipow135, the submerged electromagnetic pulse valve is mainly used in the environmental protection dust removal industry. It is controlled by the pilot valve such as electromagnetic or pneumatic. It can start and close the high-pressure gas source to produce the diaphragm valve of the pulse valve at the moment, and also is commonly known as the electromagnetic pulse valve or the gas controlled pulse valve.Use:The electromagnetic pulse valve (also called diaphragm valve) is a compressed air switch for the dust removal system of the pulse bag filter. Under the control of the output signal of the pulse controller, the filter bag is blown by the filter bag (room), so that the resistance of the dust collector is kept within the set range, so as to ensure the handling capacity and the dust collecting efficiency of the dust collector.The Z type pulse valve is a right angle valve with a angle of 90 degrees between the inlet and outlet. It is suitable for the installation link between the air bag and the blowpipe, and the air flow is unimpeded, and it can provide the cleaning gas pulse that meets the requirements.The Y type pulse valve is a submerged valve (also called an embedded valve), which is installed directly on the gas bag and has better flow characteristics. The pressure loss has been reduced, which is suitable for low gas source working conditions.Working principle:The diaphragm divides the electromagnetic pulse valve into two air chambers in the front and back. When the compressed air is connected, the compressed air enters the rear air chamber through the throttle hole. The pressure of the air chamber will close the diaphragm to the outlet of the valve, and the electromagnetic pulse valve is in the "closed" state.The electrical signal of the pulse control device moves the armature of the pulse valve, and the opening of the air chamber of the valve opens, and the air chamber rapidly loses pressure. The diaphragm moves backward and the compressed air is blown through the valve outlet. The pulse is in the "open" state.The electric signal of the pulse injection control instrument is disappearing, the armature of the electromagnetic pulse valve is reset, the air chamber is closed, the pressure of the rear air chamber is raised and the diaphragm is close to the valve outlet, and the electromagnetic pulse valve is in the "closed" state.Installation method:The input terminal (IN) of the pulse valve is connected with the metal pipe of the storage cylinder. The output end is connected with the dusting box, and the connecting thread is tightened and sealed with the tetrafluoroethylene raw material.ALSTOMmodelOPTIPOWpistonpulsecleaningvalveOPTIPOW135(24V)V1614718-0100OPTIPOW135(100V,50Hz)V1614718-0301OPTIPOW135(120V60Hz)V1614718-0400OPTIPOW135(120V60HzUL-CERTIFIED)V1614718-0700OPTIPOW135(withoutsolenoid,revolving90°C)V1614718-0800-MembraneV4549902-0100O-Ring(Fluorrubber64,5x3)8003-5573O-Ring(Nitril70SH64,5x3)2136-1422O-Ring(114,5x3)2136-1441PilotcoverV3630501-0100PlateV3630524-0100PlungerV3629022-0100Roundwasher(SS3576-5-200HVFE/ZN25)4903-2146-RubberdiscV3640660-0100Solenoidvalve(24VDC)V3611471-0100Solenoidvalve(100V,60Hz)V3611471-0201Solenoidvalve(110V,50Hz)V3611471-0300Solenoidvalve(110V,60Hz)V3611471-0200Solenoidvalve(120V,60Hz)V3611471-0400Solenoidvalve(120V,60Hz-ULCERTIFIEALSTOM'snewOPTIPOWcompactpistonpulsecleaningvalveALSTOM'sOPTIPOWnewcompactpistonpulsecleaningvalveismainlyusedforbagcleaningandinstallationonarounddrum.Lowlossofcompressedair:TheOPTIPOWpulsevalvereducestheamountofcompressedairconsumedcomparedtothediaphragmtype.
