详细说明
Product Name: Automatic Liquid Nitrogen Adding Equipment Model NO.: FL Processing Material: Liquid Composition: Nitrogen Injection Machine Voltage: 220V Customized: Customized Condition: New Type: Count Filling Machine Material Type: Liquid Feed Cylinder Structure: Single-Room Feeding Structure: Linear Filling Principle: Negative Pressure Dosing Device: Plunger Name: Nitrogen Dosing Machine Trademark: Fillex Transport Package: Wooden Case Specification: 1000*600*2000mm Origin: China HS Code: 84223010 Product Description Liquid Nitrogen Injection MachineThis liquid nitrogen injection system adopts the heat insulation like rocket and human-machine interface. Precisely injection, automatic adjustment and tracing technology. No container/No dose capability. The anti-freeze function raises utilization of the liquid nitrogen. This machine is easy operation. All of the three-piece can drink and food can be replaced by the thinner two-piece can. After filling, the liquid nitrogen will be injected into the can before sealing through the modern liquid nitrogen injection technique. The -196°C liquid nitrogen in the cans will become to nitrogen gas and expanded 700times when the liquid nitrogen absorbed the heat after sealing. Thus the nitrogen gas crowded out the air in the can prolonging the shelf life of the products. Moreover, the nitrogen gas will increase the inner pressure of the can, so the can will avoid flat tank after cooling when the can sterilized in the retort under 121°C for a long time and keep the products in a good condition during transportation. Last the aluminum can is much light than the tin can, and easily for transportation and storage, also cheaper than the tin can. Main technical parameters:ModelFLCapacity 30~400 cans/ minApplicationSuitable for can and bottleVoltage380 V 50HZ Power200wWeight100kgDimension1000×600×2000mmmm