for 1-15 series LiFePO4 battery packs
Dimension: 42*21*11mm
The battery indicator figure out fuel status of a battery pack on measuring current flow-in and flow-out from battery pack. Using GBG1-Fxx need a 'current resistor' series between 'battery cell negative pole' and batter pack negative terminal. Normally the resistor is the existing RS on the PCM or BMS of battery pack, or is an external component of this batter pack. Recommended value of this RS is 5mΩ-50mΩ, depending on the working current of battery pack. The battery fuel gauge has a +-10% capacity measuring remaining capacity.
Feature:
| LED1 flashing light LED2~5 off |
10% full capacity |
| LED1 solid light LED2~5 off |
20% full capacity |
| LED1 solid, LED2 flashing LED3~5 off |
30% full capacity |
| LED1~2 solid light LED3~5 off |
40% full capacity |
| LED1~2 solid, LED3 flashing LED4~5 off |
50% full capacity |
| LED1~3 solid light LED4~5 off |
60% full capacity |
| LED1~3 solid, LED4 flashing LED5 off |
70% full capacity |
| LED1~4 solid light LED5 off |
80% full capacity |
| LED1~4 solid, LED5 flashing |
90% full capacity |
| LED1~5 solid |
100% full capacity |
