230V Water Pipe Freeze Protection by Constant Wattage Heating Cable with Thermostat Ce UL Approved

Product Name: 230V Water Pipe Freeze Protection by Constant Wattage Heating Cable with Thermostat Ce UL Approved Model NO.: PFC Material: Copper System Structure: Pipe Laying Rated Power: 7W/FT, 23W/M Rated Voltage: 120V, 240V, 230V Outer Jacket: PVC Insulation: XLPE Braiding: Tinned Copper Heating Wire Carrier: Kevlar Fiber Trademark: ODM / OEM Transport Package: Carton Specification: 435*365*395mm Origin: China HS Code: 8516800000 Product Description Pipe Freeze Protection by Constant Wattage CableThis heating cable with an integrated energy-saving thermostat will automatically heat up when the temperature drops below 40°F/4°C. To protect water pipes from freezing and bursting in winter, simply applied the cables straight along pipes and then cover the pipes with a layer of thermal insulation.Cable Construction Features- Applicable for both metallic and plastic general water piping- Indicator light on the plug illuminates to show power is being supplied to the cable even when not heating- Energy and cost efficient: With build-in thermo-switch, the cable only operate when the ambient temperature is 40°F/4°C or less- No installation experience is necessary: Apply straight along pipes- Safe and durable- Customization available- UL/cUL Approved- CE Aapproved- 2 years warrantySpecificationNorth AmericanCable construction:twin coresConductor:Single heating conductor wraps around a fiberglass string, or 3 strands wireApply Voltage:120VPower Output:7W/ft (other output wattage also available by request)Cold Tail Length: 9.8ft (3m) Maintenance Temperature:4ºC/40ºFEuropeanCable construction:twin coresConductor:Single heating conductor wraps around a fiberglass string, or 3 strands wireApply Voltage:230V Power Output:23W/m (other output wattage also available by request)Cold Tail Length: 0.65mMaintenance Temperature:4ºC/40ºFApplication:1. Water piping2. Sprinkler system3. Greasy waste lines4. Fuel Lines5. Pump6. TankInstallationStandard Lengths: to protect a pipe with a standard length of heating cable 1) Apply the cable straight along the bottom of horizontal pipe or the "weather side" of vertical pipe2) Fastening it with application tape or good quality Listed fiberglass tape (listed fiberglass tape with temperature rating higher than 80OC/175OF) to the pipe. Non-standard Lengths: to protect a pipe with other than one standard length of heating cable 1) Apply two separate cables on opposite sides of the pipe, starting from opposite ends.2) Overrun in the middle of the pipe should not exceed 3 feet.Warning: Avoid pulling the heating cable jerking or installing against sharp edges.Warning: Do not kink or crush the cable, including walking on it or running over it with equipment.Order information:North AmericanModelHeated section length(ft)Power output (Watt)PFC007FT1-0030321PFC007FT1-0060642PFC007FT1-0090963PFC007FT1-01201284PFC007FT1-015015105PFC007FT1-018018126PFC007FT1-024024168PFC007FT1-030030210PFC007FT1-040040280PFC007FT1-060060420PFC007FT1-080080560EuropeanModelHeated section length(m)Power output (Watt)PFPC1-1A0030.921PFPC1-1A0061.842PFPC1-1A0092.763PFPC1-1A0123.784PFPC1-1A0154.6105PFPC1-1A0185.5126PFPC1-1A0247.3168PFPC1-1A0309.1210PFPC1-1A04012.2280PFPC1-1A06018.3420PFPC1-1A08024.4560Packaging (Inner & Outer Carton) Inner BoxInner Box Outer BoxOuter Box Certificates Production ProcessFurther InformationPlease consult the appropriate termination instructions and the E-POLY Installation, Testing and Maintenance Manual for further details.