详细说明
Product Name: 2 Input/2 Output Converter Tengcon Tg6054 0/4-20mA DC Signal Isolator Model NO.: TG6054 Certification: Ce, ISO Brand Name: Tengcon Transmission Error: 0.1 Degree, 0.2 Degree Current Output Load: 4~20mA Dimension: 16X116X110 (mm) Weight: about 110g~120g Operating Temperature: -20~60 (Centigrade Degree) Supply Voltage: 20~30VDC Input/Output: 2 Input/2 Output Warranty: >2 Years Brand: Tengcon Trademark: Tengcon Transport Package: Standard Carton Specification: CE Origin: China Product Description 2 input/2 output Tengcon TG6054 0/4-20mA DC Signal IsolatorBrandTengconDimension16*116*110mmWeight110-120gWorking Temp-20~+60Power Supply24VDC Range from 20-30VDCInput/Output2 Input/2 OutputInput Signal4-20mA,0-20mA,0-10mA,1-5v,0-5v,0-10vOutput Signal4-20mA,0-20mA,0-10mA,1-5v,0-5v,0-10vSpecifications1.power supply for site instruments2.signal isolated transfer3.signal conversion4.signal allocation in many ways5.alarm drivingTENGCON TG6054 0-10V signal isolation1. Modular design, clamping structure2.Plug-in wire terminal, independent power wire terminal,and availability of plugging with power for convenience of installation, wiring and maintenance.3.Series with CE certificateTG 6000 series is a kind of electrical interface equipment developed by our company which is applicable for non-explosion-proof areas and can be used to connect site instruments and control room. Through reliable power-input-output isolation, it can resolve the site interference of auto-control system and make sure the stability and reliability of the system.Technical parameters1.Power requirement: 20~30VDC;2.Power with general rated value: 24VDC;3.Transmission error: 0.1 degree, 0.2 degree(temperature transmitters);4.T emperature drift: Superior to 0.1% FS/10°C(allowed temperature range);5.Response time: < 1s (10~90%);6.Stabilizing time: about 3~5s;7.Current output load: 4~20mA, ≤5 50Ω;8.V oltage output inner impedance: inner resistance ≤5 00Ω;9.Dielectric strength (among input/output/power supply/instrument housing and wire terminals): ≤5 00Ω;10.Insulation resistance (among power supply/input/output): ≥1 00MΩ;11.Operating temperature range: -20~+60°C;12.Shipping and storage temperature range: -40~+80°C;13.Operating humidity allowed: 5~95%RH (no condensation);14.Operating aTGospheric pressure: 80~106KPa ;15.Electromagnetic compatibility: in accord with 89/336/EEC, IEC/EN 61000;16.Protection grade: IP20 ;17.Housing material: PC+ABS;18.Installation: 35mm standard rail clamping installation;19.Cable in use: 0.5~2.5mm wire;20.Dimension: Width × h eight × l ength = 16× 116× 110 (mm);21.Weight: about 110g~120g;Product structureDimension diagramModel selectionIntroduction. Main Technical SpecificationDC signal repeater isolatorInputs DC signal of various equipments, and outputs DC current or voltage signal to control system or other instruments after isolation and interference.This DC signal repeater isolator adopts independent DC power supply with power-input-output isolated.Electric supplyPower voltage: 20~30VDCPower indicator: Power LED lights on: GreenCurrent consumption (24VDC power supply): < 25mA (single-channel) < 45mA (single-channel, dual-output) < 45mA (single-channel, tri-output) < 50mA (dual-channel, dual-output)InputInput current: 4~20mA; 0~20mA; 0~10mA; other specified currentInput voltage: 1~5V; 0~5V; 0~10V; other specified voltageInput impedance: Current input 50Ω; voltage input ≥500KΩOutputOutput current: 4~20mA; 0~20mA; 0~10mA; other specified currentOutput voltage: 1~5V; 0~5V; 0~10V; other specified voltageAllowed load current: 0~550Ω (Power ≥2 2VDC at full load of 550Ω)Voltage output impedance: ≤ 500ΩOutput ripple: < 10mVp-pGeneral technical parametersTransmission error: ± 0.1%T emperature drift: ± 0.015% / °C(10~90%)Power change error: (voltage scope: 20~30VDC)Dielectric strength: Input-output-power 1.5KV, 1min, 50HzInsulation resistance: Input-output-power ≥ 100MΩ/500VDCOperating temperature: -20~+60°CDimension: Width × h eight × l ength = 16× 116× 110(mm)about us: Beijing Tengcontrol Technology Limited CompanyRelyonthehardware,softwareandnetworktechnique,TengconTechnologydevotedtomanufactureindustrialautomationcoreproductsandsystemswithmorethan30%ofemployeearefocusinResearch&Development.Tengconhasdeepandwideexperienceinvarioussignalacquisition,especiallyonelectricsignalacquisition,andalso,familiarswithallmainprotocollikeMODBUS,IEC8705,PROFIBUSDP,CAN,PROFINETetc.,andknowstheropesofIEC61131andtechnologyofProgrammableLogicControllerdevelopmentaswellasIEEE1588andClockSynchronizationTechnologyinEthernet,wearealsorobustonantiinterferenceandlightningprotectiontechnologytoensurethereliabilityofeveryproductdeliveredtocustomer.TengconTechnologyproposedanewadvancedconceptofCompleteDistributedNetworkControlSystem,inthatthecontrolsystemisconstructedviaabsolutelynewtheory.ItcanbeappliedtoconstructtheSCADA(SupervisoryControlandDataAcquisition),PLC(ProgrammableLogicController)andDCS(DistributedControlSystem).TypicalproductweredevelopedbasedontheseisT9serieswhichwerelaunchedinmarketalready.Morethan100thousandsofproducthavebeendeliveredtocustomersandgotwidelyandgoodcustomeracceptanceinpastyears.Alltheseproductsarebeingusedinvariousindustriesin18counties.TheyshowedstrongreliabilityindifferentsystemsandwideenvironmentincludeHighSpeedRail,oilandgasfield,powermonitorandcontrolsystem,kindofautomaticproductionline,BuildingManagementSystem,citylightingcontrolsystem,vehiclemonitoring,agriculturalfarmsetc.wearekeepingtodevelopandprovidefirstclassofproducttoallthecustomerinworldwide.
