1200Mbps Powerline Adapter Network Extender PLC Ethernet Bridge For CCTV

Product Name: 1200Mbps Powerline Adapter Network Extender PLC Ethernet Bridge For CCTV Condition: New Certification: CE, ISO, RoHS, FCC Classb Weee Information content: Data Support Network: Ethernet Type: Industrial 4.0 Usage: Telephone, Computer, Workstation, Server, Mobile phone, Laptop, Industrial Communication Security: 128-AES Modulation: OFDM Transfer Rate(Phy): 200Mbps Trademark: Wondertek Transport Package: Inner Box and Paper Carto Specification: 120*90*45mm(LxWxH) Origin: China HS Code: 8517699000 Product Description Brief introduction:BPL SmartPowerline EthernetBridge is an industrial powerline communication product developed by WonderTek. The product adopts the ITU-T G.9960 G.hn communication protocol standard, at present has been widely used in intelligent manufacturing, intelligent building, intelligent city street light monitoring, smart meters, solar panels and communications in dangerous environment, Marine applications, automotive applications, aerospace applications, railway, mining, intelligent storage, intelligent sorting, automatic garage cable or sliding contact line, and many other field.1.1 Highlight1.1.1 Technical parameters Support G.hnIndustrial DIN rail style installation.Up to 6 levels of relay can be achievedSelf-adapt the rate.l1.1.2 ManageabilitySupport Remote Firmware update(TR069).802.3D EthernetBridge.802.1QVLAN.QualityofService(QoS).IGMO(IPv4)Snooping&MLD(IPv6)Snooping.1.1.3Operating environmentWorking temperature: -40ºC-85ºC.Operating humidity: 10%-85% no condense.Storage humidity:5%-90% no condense.1.1.4 Design standardsITU-T G.9960IEC 60529IEC 50022IEC 60068-2-6 Specification:Interface1*LAN 10/100/1000base-TX self adaption RJ45 port,MDI/MDX supportLED display lightsPWR(power light), PLC(PLC signal light),ETH(Ethernet light)Transfer band2-25MHzand MIMOprotocol(PHY)ITU-T G.9960 (G.hn) IEEE802.3,IEEE802.3x, IEEE802.3uSecurity128-AESTransfer rate(PHY)200MbpsNumber of each group64ModulationOFDMMaximum effective data transfer rateTCP/IP 100MbpsManageabilityRemote Firmware update,support TR-069(optional)802.1D Ethernet Bridge802.1Q VLANQuality of Service(QoS)Operating temperature-40ºC-85ºCSize120*90*45mm(L×W×H)Weightabout 0.30kgOperating environmentworking temperature:-10ºC-85ºCworking humidity5%-90% non-condensed stateCertificationFCC,CE class B,WEEE,RoHSRelay numberMaximum level 6 relayTransmission distance about 2500mTransmission lineThree-wire transmission MIMO Mode,Two core SISO mode1.2 Features(1) Packet loss:≤0.1%(100M,load 70%);(2) Support 7*24 hours all weather operation;(3) Hardware watch dog function;(4) PING<2MS.1.3 Immunity of ESDThe testing voltage which the device should be beared: ±6kV direct Discharge, ±8kV air discharge; Discharge number in Each sensitive testing point: Plus-n-Minus 10 times each;Every time the discharge interval is 1 s.According to B/T 17626.2-2006.1.4 Immunity of electrical fast transient impulse group(Common mode)The testing voltage which the device should be beared:Between the power supply voltage port and ground: ±2.0kV; Between signal circuit and ground: ±1.0kV;Repetition frequency: 5KHz;Test duration: 1 min/ time;Testing times: Plus-n-Minus 5 times each.According to GB/T 17626.4-2008.1.5 Anti interference of surge impactThe testing voltage which the device should be beared: ±2kV;The interval of continuous impulses: 1min/time;Test number: Plus-n-Minus 5 times each.According to GB/T 17626.5-2008.(protection: all models protection and varistor series of discharge tube type)1.6Anti- vibrationMeet the demand of MX3 in TB1433(0-200Hz,2g acceleration, maximum amplitude 7mm), interface with no loose, device with no Sealing off and drop in the test.1.7 System topology 1.8Product model selectionModelEthernetPortLine EnvironmentNetwork StructureWD-1001M-BPL-V3-DM1AC(3phases)only three phase connection, and according to the unified standard wiring(85-520V)WD-1001M-BPL-V3-RD1AC(3phases)only three phase connection, and according to the unified standard wiring(85-520V)WD-1001M-BPL-S-DM1AC(phase + null+ ground)Single phase with or without ground(85-520V)WD-1001M-BPL-S-RD1AC(phase + null+ ground)Single phase with or without ground(85-520V)WD-1001M-BPL-DC01-DM1DC9-36VWD-1001M-BPL-DC01-RD1DC9-36VWD-1001M-BPL-DC02-DM1DC18-75VWD-1001M-BPL-DC02-RD1DC18-75VWD-1001M-BPL-DC03-DM1DC100-700VWD-1001M-BPL-DC03-RD1DC100-700V