1200Mbps 800 Meters Industrial Mesh Wi-Fi Ethernet Bridge

Product Name: 1200Mbps 800 Meters Industrial Mesh Wi-Fi Ethernet Bridge Model NO.: WD-G30 Standard: Mesh Wi-Fi OEM: Accepted Usage: Industry Bandwidth: 1200Mbps Range: 800m Ports: 3 Trademark: Wondertek Transport Package: Paper Carton Specification: 120*89*44mm Origin: China HS Code: 85176990 Product Description Product SpecificationsBrief introductionIndustrial Wi-Fi Mesh WD-G30is developed by WonderTek Technology (KunShan) Co.,LTD., it supports802.11ac .The product has been widely used in many aspect just as railway, mines, industrial telecommunication and metro etc..1.1 Highlight1.1.1 Technical parameters lSupport802.11ac.lIndustrial IP40 style installationlThe maximum transfer distance up to 800 meterslSelf-adapt the rate1.1.2 ManageabilitylSupport Remote Firmware update(TR069)l802.3D EthernetBridge.l802.1QVLAN.lQualityofService(QoS).lIGMO(IPv4)Snooping&MLD(IPv6)Snooping1.1.3Operating environmentlWorking temperature: -40ºC-80ºC.lOperating humidity: 10%-85%no condensel Storage humidity:5%-90%no condense1.1.4 Design standardslHomePluglIEC 60529lIEC 50022lIEC 60068-2-6802.11acSpecification:Model WD--G30Interface3*LAN 10/100/1000base-TXself adaption RJ45,1*DC power interface 1*LED display lightEthernet,PLC link ,Power,Wi-FiTransfer band2-68MHzProtocol(PHY)IEEE802.3,IEEE802.3x, IEEE802.3u HomePlug 802.11acSecurity128-AESTransfer rate(PHY)1200MbpsModulationOFDMManageabilityRemote Firmwareupdate,support TR-069(optional)802.1D Ethernet Bridge802.1Q VLANQuality of Service(QoS)IGMO(IPv4)Snooping&MLD(IPv6)SnoopingWorking voltageAC 90V-520V Operating temperature-40ºC-80ºCSize220*160*100mm(L×W×H)Weight1.15kgOperating environmentOperatinghumidity:10%-85% (no condense)Storagehumidity: 5%-90%(no condense)CertificationFCC,CE class B,WEEE,RoHS1.2 FeaturesPacket loss:≤0.1%(100M,load 70%)Support 7*24 hours all weather operationWDT hardware watch dog function2*1000M Ethernet PortGateway ,Bridge,WIFI ClientModelSupport: RS485,232and Baud rate :115200bpsWIFI MESHBuilt-in WIFI PA,MSTXPWR :26dbmExternal dual band high gain antenna :5dbiWIFI WPSPower: DCor ACSupport external antenna,with SMAconnector1.3Immunity of ESDThe testing voltage which the device should be beared: ±6kV direct Discharge, ±8kV air discharge. Discharge number in Each sensitive testing point: Plus-n-Minus 10 times each, Every time the discharge interval is 1 s, according to B/T 17626.2-2006.1.4Immunity of electrical fast transient impulse group(Common mode)The testing voltage which the device should be beared: between the power supply voltage port and ground: ±2.0kV, between signal circuit and ground: ±1.0kV, repetition frequency: 5KHz, test duration: 1 min/ time, testing times: Plus-n-Minus 5 times each. According to GB/T 17626.4-2008.1.5 Anti interference of surge impactThe testing voltage which the device should be beared: ±2kV, the interval of continuous impulses: 1min/time. Test number: Plus-n-Minus 5 times each. According to GB/T 17626.5-2008.(protection: all models protection and varistor series of discharge tube type)1.6Anti- vibrationMeet the demand of MX3 in TB1433(0-200Hz,2g acceleration, maximum amplitude 7mm), interface with no loose, device with no Sealing off and drop in the test.